AD595AQ

Analog DevicesExtended

0℃~+50℃ 300uA 5V~15V ±3℃ CDIP-14 Temperature Sensors ROHS

Part id: adi/AD595AQ
Category: Temperature Sensors
Package: CDIP-14
Pins: 14
In stock: 0 at JLCPCB (C650314)
Used on: 2 open-source boards

Overview

The AD595AQ is a temperature Sensor made by Analog Devices in a CDIP-14 package with 14 pins. 0℃~+50℃ 300uA 5V~15V ±3℃ CDIP-14 Temperature Sensors ROHS.

PCBKit's library has its KiCad symbol (dk_PMIC-Thermal-Management:AD595AQ, from Digikey) and its footprint (Source_Footprints:DIP-14_W3mm, from Digikey), ready for a KiCad board. JLCPCB lists it (part C650314). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

dk_PMIC-Thermal-Management:AD595AQFrom Digikey

Footprint

Source_Footprints:DIP-14_W3mmFrom Digikey

Pinout

The pins of the AD595AQ
Pin	Name	Type
1	+IN	Input
2	+C	Output
3	+T	Passive
4	COM	Passive
5	-T	Passive
6	-C	Output
7	V-	Power in
8	FB	Passive
9	VO	Output
10	COMP	Passive
11	V+	Power in
12	+ALM	Passive
13	-ALM	Passive
14	-IN	Input

Parameters

Detection Temperature Range: 0℃~+50℃
Features: Factory temperature calibration, Self-diagnosis function, On-chip temperature compensation, Hardware comparator / independent temperature control output
Operating Temperature: -55℃~+125℃
Standby Current: 300uA
Tolerance: ±3℃
Voltage - Supply: 5V~15V

Order codes

AD595AQLCSC C650314

Show this part on your page

<iframe src="https://pcbkit.io/embed/parts/adi/AD595AQ" title="AD595AQ in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

For any web page: the part itself, turned and zoomed by the reader.

Open-source boards using it

4 layers68.6 × 53.3 mm
ReflowToasterOven
RobertPHeller/ReflowToasterOven
A hack using an Arduino to control a toaster oven for use as a Reflow oven for soldering Surface Mount Devices
19 parts1
4 layers114.3 × 45.8 mm
ReflowToasterOven2
RobertPHeller/ReflowToasterOven2
Updated / reworked version using an Adafruit Feather M0 Express as the MCU instead of an Arduino
15 parts1GPL-2.0

Questions

Is there a KiCad symbol and footprint for the AD595AQ?

Yes. The symbol is dk_PMIC-Thermal-Management:AD595AQ and the footprint Source_Footprints:DIP-14_W3mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AD595AQ?

CDIP-14, with 14 pins. Its footprint is drawn on this page.

Where is the AD595AQ datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the AD595AQ?

JLCPCB lists it as part C650314, with 0 in stock; the sellers' links on this page open their listings.

Which open-source boards use the AD595AQ?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.