AD5302BRM
Analog DevicesExtended
MSOP-10 Digital to Analog Converters (DAC)
- Part id
- adi/AD5302BRM
- Category
- Uncategorised
- Package
- MSOP-10
- Pins
- 5
- In stock
- 0 at JLCPCB (C22425059)
Overview
The AD5302BRM is an uncategorised made by Analog Devices in a MSOP-10 package with 10 pins. MSOP-10 Digital to Analog Converters (DAC).
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:AD5302BRM-REEL7, from EasyEDA) and its footprint (Package_SO:MSOP-10_3x3mm_P0.5mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C22425059).
Symbol
Footprint
Pinout
10| Pin | Name | Type |
|---|---|---|
| 1 | LDAC# | Unspecified |
| 2 | VDD | Unspecified |
| 3 | VREFB | Unspecified |
| 4 | VREFA | Unspecified |
| 5 | VOUTA | Unspecified |
| 6 | VOUTB | Unspecified |
| 7 | SYNC# | Unspecified |
| 8 | SCLK | Unspecified |
| 9 | DIN | Unspecified |
| 10 | GND | Unspecified |
Parts like it
8MS5112M
MSOP-10-40℃~+125℃ 16 2 2.7V~5.5V 240Hz 275kHz 290uA Built-in Built-in I2C Multiplexers、Power-on reset、Bipolar input、Integrated modulator、Built-in digital filter Sigma-Delta Support Yes MSOP-10 Analog to Digital Converters (ADC) ROHSHangzhou Ruimeng TechUncategorisedLKP4153MS
MSOP-10MSOP-10 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSLKWICUncategorisedXADC084S021-XC
MSOP-10-40℃~+85℃ 0.4LSB 1.6MHz~6.4MHz 2.7V~5.25V 200kHz 4 49.5dB 8 Built-in External Multiplexers No Not supported SAR SPI MSOP-10 Analog to Digital Converters (ADC) ROHSSi-ChangeUncategorisedXADC084S051-XC
MSOP-10-40℃~+85℃ 0.5LSB 2.7V~5.25V 3.2MHz~8MHz 4 49.5dB 500kHz 8 Built-in External Multiplexers No SAR SPI MSOP-10 Analog to Digital Converters (ADC) ROHSSi-ChangeUncategorisedVP3481MSG10-B
MSOP-10UncategorisedVIVALTC5223YV10
MSOP-10LUncategorisedLinearinTPC5180-VS2R
MSOP10Multi-chip synchronization、Synchronous triggering MSOP10 Analog to Digital Converters (ADC) ROHS3PEAKUncategorisedTPC6160IS-VS2R
MSOP10MSOP10 Analog to Digital Converters (ADC) ROHS3PEAKUncategorised
Questions
Is there a KiCad symbol and footprint for the AD5302BRM?
Yes. The symbol is EasyEDA_Cloud:AD5302BRM-REEL7 and the footprint Package_SO:MSOP-10_3x3mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the AD5302BRM?
MSOP-10, with 10 pins. Its footprint is drawn on this page.
Where can I order the AD5302BRM?
JLCPCB lists it as part C22425059, with 0 in stock; the sellers' links on this page open their listings.
What can replace the AD5302BRM?
Parts like it in the library: the MS5112M by Hangzhou Ruimeng Tech, the LKP4153MS by LKWIC, the XADC084S021-XC by Si-Change and the XADC084S051-XC by Si-Change. Check their datasheets: a part that fits the footprint may still differ in its ratings.