Skip to the content
12345678910111213141516171819202122232425262728

XM125

AcconeerExtended

-40℃~+85℃ 1.71V~1.89V、2.97V~3.45V Radar Radar Sensor SMD,18.6x15mm RF Misc ICs and Modules ROHS

DatasheetJLCPCBLCSC
Part id
acconeer/XM125
Category
RF Misc ICs And Modules
Package
SMD,18.6x15mm
Pins
28
In stock
5 at JLCPCB (C5837899)
Used on
2 open-source boards

Overview

The XM125 is a RF Misc ICs And Module made by Acconeer in a SMD,18.6x15mm package with 28 pins. -40℃~+85℃ 1.71V~1.89V、2.97V~3.45V Radar Radar Sensor SMD,18.6x15mm RF Misc ICs and Modules ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:XM125, from EasyEDA) and its footprint (EasyEDA_Cloud:COMM-SMD_XM125, from EasyEDA), ready for a KiCad board. 5 are in stock at JLCPCB (part C5837899). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

MCU_INT28GND27MISC_GPIO2_BOOT026MISC_GPIO125MISC_GPIO024DEBUG_UART_TX23GND22DEBUG_UART_RX21I2C_ADDRESS20GND19I2C_SDA18I2C_SCL17GND16WAKE_UP15NRST14GND13SWD_CLK12SWD_IO11GND10UART_RTS9UART_CTS8GND7UART_RX6UART_TX5GND41V83GND2VIN1
EasyEDA_Cloud:XM125From EasyEDA

Footprint

12345678910111213141516171819202122232425262728
EasyEDA_Cloud:COMM-SMD_XM125From EasyEDA

Pinout

28
The pins of the XM125
PinNameType
1VINUnspecified
2GNDUnspecified
31V8Unspecified
4GNDUnspecified
5UART_TXUnspecified
6UART_RXUnspecified
7GNDUnspecified
8UART_CTSUnspecified
9UART_RTSUnspecified
10GNDUnspecified
11SWD_IOUnspecified
12SWD_CLKUnspecified
13GNDUnspecified
14NRSTUnspecified
15WAKE_UPUnspecified
16GNDUnspecified
17I2C_SCLUnspecified
18I2C_SDAUnspecified
19GNDUnspecified
20I2C_ADDRESSUnspecified
21DEBUG_UART_RXUnspecified
22GNDUnspecified
23DEBUG_UART_TXUnspecified
24MISC_GPIO0Unspecified
25MISC_GPIO1Unspecified
26MISC_GPIO2_BOOT0Unspecified
27GNDUnspecified
28MCU_INTUnspecified

Open-source boards using it

2
  • 2 layers77 × 37 mmPeripheral unit, the printed circuit board in 3D

    Peripheral unit

    kzoropoulos/Fall_Detection_System

    A low-power, privacy-friendly elderly fall detection system using 60GHz mmWave radar, PIR sensors, and Zigbee. It features independent room sensors and a resilient central hub for real-time emergency alerts.

    13 parts2
  • 2 layers72.4 × 42.4 mmWork, the printed circuit board in 3D

    Work

    Heartland-Data/esp32-mintia-sensor-kit

    本リポジトリは、MINTIAケースにESP32と各種センサを組み込む試作用ファームウェアの参考実装です。

    71 parts1Apache-2.0

Questions

Is there a KiCad symbol and footprint for the XM125?

Yes. The symbol is EasyEDA_Cloud:XM125 and the footprint EasyEDA_Cloud:COMM-SMD_XM125, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the XM125?

SMD,18.6x15mm, with 28 pins. Its footprint is drawn on this page.

Where is the XM125 datasheet?

Acconeer publishes it: the Datasheet link on this page opens it.

Where can I order the XM125?

JLCPCB lists it as part C5837899, with 5 in stock; the sellers' links on this page open their listings.

Which open-source boards use the XM125?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.