2 layers98 × 27 mm
2 layers42 × 10 mm
Vik magnetic adapter
zzeneg/zzkeeb17Shared library for my keyboard components
- Size
- 42 × 10 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 12
- Pads
- 68
- Tracks, vias
- 238, 22
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Jan 2023
- Updated
- 9 Sep 2025
Overview
Vik magnetic adapter is an open-source printed circuit board by zzeneg, from the zzeneg/zzkeeb repository on GitHub, published under the MIT licence. It is a 2-layer board of 42 × 10 mm with 5 parts on 12 nets, routed with 238 tracks and 22 vias.
It belongs with the keyboards and input and interfaces and adapters boards of this library.
README
README.mdzzkeeb
Shared library for my keyboard components
KiCad
Installation
Go to KiCad, Preferences -> Configure Paths, add new row with name ZZKEEB and path to zzkeeb/kicad
Included projects
- https://github.com/sadekbaroudi/fingerpunch
- https://github.com/foostan/kbd
- https://github.com/crides/kleeb
- https://github.com/keebio/Keebio-Parts.pretty
- https://github.com/0xCB-dev/0xCB-libs
- https://github.com/Fooblitzky/DCS_keycaps.git
Additional 3D models
- Encoder knob
- 11mm rotary encoder
- ChocV1 socket
- FFC horizontal 12p
- KS-33 switch/socket
- 5way switch
- JST 12pin 1.25 connectors
Custom 3D models
- choc opener, just sprued two models from https://www.thingiverse.com/thing:3097933
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Connector_VIK-keyboard | zzkeeb:Connector_VIK-horizontal-keyboard | VIK_K4, VIK_K5 |
| 2 | Connector_VIK-keyboard | zzkeeb:Connector_VIK-vertical-keyboard | VIK_K2, VIK_K3 |
| 1 | Connector_VIK-keyboard | zzkeeb:Connector_VIK-magnetic-keyboard | VIK_K1 |
Questions
How big is the Vik magnetic adapter PCB?
It measures 42 × 10 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Vik magnetic adapter use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vik magnetic adapter KiCad files?
From the zzeneg/zzkeeb repository on GitHub, at the commit this page was made from: the board is kicad/vik-magnetic-adapter/pcb.kicad_pcb and its schematic kicad/vik-magnetic-adapter/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vik magnetic adapter design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers21 × 33 mm
24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm
A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm
Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm
KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm
- 2 layers43.2 × 28.5 mm
- 2 layers20.3 × 15.2 mm
L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT