

Connector
Wireless unibody/unsplit keyboard
- Size
- 51.8 × 7.8 mm
- Copper layers
- 2
- Thickness
- 1.2 mm
- Parts
- 5
- Nets
- 12
- Pads
- 42
- Tracks, vias
- 84, 12
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Nov 2023
- Updated
- 6 Oct 2024
Overview
Connector is an open-source printed circuit board by zzeneg, from the zzeneg/duet repository on GitHub, published under the MIT licence. It is a 2-layer board of 51.8 × 7.8 mm with 5 parts on 12 nets, routed with 84 tracks and 12 vias.
It belongs with the keyboards and input boards of this library.
README
README.mdduet
Wireless unibody/unsplit portable keyboard.
[!NOTE] One duet is available for purchase right now
Features
- wireless (nice!nano MCU)
- unibody that can be disassembled into two parts for traveling
- 40 Choc V1 switches
- 1 rotary encoder and 1 five-way switch
- reversible PCB
- 3D printed case
- nice!view support
Photos
https://github.com/zzeneg/duet/assets/910255/740595a8-76a9-42da-903d-3cff3896a925
Firmware
zmk-config - my custom keymap, use it for testing only. Fork and create your own keymap instead.
Instructions
All files are available in repo or GitHub release.
Support
If you like my work and want to support my future designs, please consider sponsorship.
Sponsors
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Connector_VIK-keyboard | zzkeeb:Connector_FFC-12pin-1mm-vertical | VIK_K2, VIK_K4 |
| 2 | MountingHole | zzkeeb:Hole_M2-TH | H1, H2 |
| 1 | Connector_VIK-keyboard | zzkeeb:Connector_VIK-magnetic-keyboard | VIK_K1 |
More from zzeneg/duet
1- 2 layers165.5 × 101.1 mm

Similar boards
- 2 layers98 × 27 mm

- 2 layers21 × 33 mm

24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm

A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm

Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm

KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm

- 2 layers43.2 × 28.5 mm

- 2 layers20.3 × 15.2 mm

L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT
Questions
How big is the Connector PCB?
It measures 51.8 × 7.8 mm and has 2 copper layers, 1.2 mm thick.
What parts does the Connector use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Connector KiCad files?
From the zzeneg/duet repository on GitHub, at the commit this page was made from: the board is pcb/connector.kicad_pcb and its schematic pcb/connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Connector design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
