
Pi485
bvarner/pi485
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino

dự án kicad
ESP32 is an open-source printed circuit board by zumintam, from the zumintam/Kicad repository on GitHub. It is a 2-layer board of 65.9 × 45.9 mm with 34 parts on 59 nets, routed with 298 tracks and 0 vias.
It is built around the ESP32-DEVKITC-32UE, MAX485ED and RS485. Its parts include 23 connectors, 9 resistors and 2 ICs. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 7 | LED | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J8, J11, J12, J13, J14, J15, J16 |
| 4 | Conn_01x01_Pin | MountingHole:MountingHole_2.2mm_M2_Pad | J19, J21, J22, J23 |
| 2 | ANA 1 | Connector_JST:JST_EH_S3B-EH_1x03_P2.50mm_Horizontal | J1, J2 |
| 2 | Conn_01x03_Pin | Connector_JST:JST_EH_S3B-EH_1x03_P2.50mm_Horizontal | J3, J4 |
| 1 | B1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J20 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J17 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J18 |
| 1 | ESP32-DEVKITC-32U | ESP32-DEVKITC-32U:MODULE_ESP32-DEVKITC-32U | U1 |
| 1 | H | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J10 |
| 1 | L | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | MAX485 | MAX485_MODULE_5V_LOGIC_TLL_TO_RS-485_CONVERTER:MODULE_MAX485_MODULE_5V_LOGIC_TLL_TO_RS-485_CONVERTER | U4 |
| 1 | RS232 | Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J5 |
| 1 | RS485 | Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J6 |
| 1 | Type C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |

bvarner/pi485
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino



JCohner/booth
Using 1000 NeoPixels with FastLED library we are controlling a custom built DJ booths lighting. The NeoPixels are organzied into rectangles on a DJ of which the light difuses around the rectnagle.



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
It measures 65.9 × 45.9 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the ESP32-DEVKITC-32UE, MAX485ED and RS485. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the zumintam/Kicad repository on GitHub, at the commit this page was made from: the board is ESP32.kicad_pcb and its schematic ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask zumintam before reusing the design.