Skip to the content
2 layers81.5 × 81.2 mmDron, the printed circuit board in 3D

Scalable OS for 6502/65816

Size
81.5 × 81.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
30
Pads
47
Tracks, vias
86, 4
Pours
10
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
22 Dec 2015
Updated
26 May 2025

Overview

Dron is an open-source printed circuit board by zuiko21, from the zuiko21/minimOS repository on GitHub, published under the MIT licence. It is a 2-layer board of 81.5 × 81.2 mm with 7 parts on 30 nets, routed with 86 tracks and 4 vias.

README

README.md

This project is under the MIT License, see LICENSE for details.

minimOS

Please note that this doc is OBSOLETE. Read about updated details in the new architecture.md file.

Minimalistic, portable, scalable Operating System for everything from embedded devices to (quasi) full-featured desktop computers!

Purpose

Currently in a VERY early development stage, hopefully will become a common reference platform for deployment of computer-related appliances -- think about embedded systems, like the original intent: an Actual Exposure Time Meter for classic photographic cameras. But by virtue of its modularity and scalability would equally serve to a whole breed of home-made, retro-inspided computers.

Future ports

Initial target is the venerable 65(C)02 and its big brother, the 16-bit enabled 65816 (port known as minimos·16) which will keep compatibility with existing '02 code. But other ports to many CPU architectures are in mind, like the Motorola 68xx / Hitachi 63xx series (minimOS·63, with the interesting 6809/6309 branch as minimOS·69), 680x0 (minimOS·68), 8080/8085/Z80 (minimOS·80), even (God forbid! :-) the commonly used x86 (minimOS·86). I really have little-to-no knowledge about this CPU family, nor about the usual IBM-based PC architecture; hopefully someone will be able to port minimOS without too much of a chore, that would give a very interesting 'breath' to (otherwise useless) older PCs.

Supported architectures

This section has been moved to the hardware section

Parts

7
QtyValueFootprintReferences
1Arduino Nano BLE v2Module:Arduino_NanoA1
1BATConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ6
1DCVConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1
1ESC1Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2
1ESC2Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1ESC3Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1ESC4Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ5

More from zuiko21/minimOS

12
  • 2 layers177.8 × 130.8 mmDurango, the printed circuit board in 3D

    Durango

    zuiko21/minimOS

    Scalable OS for 6502/65816

    159 parts23MIT
  • 2 layers177.8 × 130.8 mmFull, the printed circuit board in 3D

    Full

    zuiko21/minimOS

    Scalable OS for 6502/65816

    130 parts23MIT
  • 2 layers250.8 × 130.2 mmOmronkbd, the printed circuit board in 3D

    Omronkbd

    zuiko21/minimOS

    Scalable OS for 6502/65816

    125 parts23MIT
  • 2 layers351.8 × 144.1 mmPluskbd, the printed circuit board in 3D

    Pluskbd

    zuiko21/minimOS

    Scalable OS for 6502/65816

    123 parts23MIT
  • 2 layersKeyboard, the printed circuit board in 3D

    Keyboard

    zuiko21/minimOS

    Scalable OS for 6502/65816

    106 parts23MIT
  • 2 layers177.8 × 130.8 mmTop5x8kbd, the printed circuit board in 3D

    Top5x8kbd

    zuiko21/minimOS

    Scalable OS for 6502/65816

    81 parts23MIT
  • 2 layersCjss301, the printed circuit board in 3D

    Cjss301

    zuiko21/minimOS

    Scalable OS for 6502/65816

    81 parts23MIT
  • 2 layers99.7 × 63.5 mmTri psg, the printed circuit board in 3D

    Tri psg

    zuiko21/minimOS

    Scalable OS for 6502/65816

    54 parts23MIT
  • 2 layersPocket, the printed circuit board in 3D

    Pocket

    zuiko21/minimOS

    Scalable OS for 6502/65816

    53 parts23MIT
  • 2 layers97.8 × 72.4 mmPico vdu, the printed circuit board in 3D

    Pico vdu

    zuiko21/minimOS

    Scalable OS for 6502/65816

    47 parts23MIT
  • 2 layers97.8 × 72.4 mmRosario, the printed circuit board in 3D

    Rosario

    zuiko21/minimOS

    Scalable OS for 6502/65816

    45 parts23MIT
  • 2 layers80 × 63.5 mmComponent, the printed circuit board in 3D

    Component

    zuiko21/minimOS

    Scalable OS for 6502/65816

    44 parts23MIT

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the Dron PCB?

It measures 81.5 × 81.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dron use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dron KiCad files?

From the zuiko21/minimOS repository on GitHub, at the commit this page was made from: the board is other/dron/dron.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dron design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).