Skip to the content
2 layers121 × 102.9 mmAIO438, the printed circuit board in 3D

4x38W amplifier with DSP and BT

Size
121 × 102.9 mm
Copper layers
2
Thickness
0.57 mm
Parts
31
Nets
93
Pads
241
Tracks, vias
182, 61
Pours
3
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
6 May 2021
Updated
5 Jun 2025

Overview

AIO438 is an open-source printed circuit board by ZOUDIO, from the ZOUDIO/AIO438 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 121 × 102.9 mm with 31 parts on 93 nets, routed with 182 tracks and 61 vias.

It is built around the PJ-324M. Its parts include 13 connectors and 11 resistors. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

Zoudio AIO438

4x38W amplifier with DSP and BT

image

Based on:

  • 2x Texas Instruments TAS5825M amplifiers
  • Qualcomm QCC3031 Bluetooth module
  • Atmel Atmega328PB microcontroller

Amplifier / DSP configuration is compiled by the Zoudio Configtool (zoudio.com/configtool)
Configuration is uploaded via the USB/UART connection and saved on an EEPROM
DSP flow is loaded at boot time.

Amplifier is always on, with a low-power (<100uA) 'off' state.
User control and state indication is done via a wiring harness with rotary encoder (on/off + volume), status LED and 3.5mm input.

Disclaimer
Design is not in production anymore as of March 2025.
Files are made open-source for inspiration only.
No support is provided.

Contact
info@zoudio.com

Parts

31
QtyValueFootprintReferences
82RPackage_TO_SOT_SMD:TO-252-2R1, R2, R3, R4, R5, R8, R9, R10
4Mounting holeMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
3JST-PH 01x02Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ5, J6, J11
2testTestPoint:TestPoint_Pad_D1.0mmTP2, TP3
10RResistor_SMD:R_0603_1608MetricR17
110kResistor_SMD:R_0603_1608MetricR7
11kResistor_SMD:R_0603_1608MetricR6
15mm screwterminal 01x12zoudio_footprints:Multicomp_12P_5mmJ4
15mm screwterminal 01x12Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_12-G-5,08_1x12_P5.08mm_HorizontalJ9
1Cliff_FC68148zoudio_footprints:FC68148J12
1JST-PH 01x03Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ1
1JST-PH 01x08Connector_JST:JST_PH_B8B-PH-K_1x08_P2.00mm_VerticalJ7
1JST-PH 01x10Connector_JST:JST_PH_B10B-PH-K_1x10_P2.00mm_VerticalJ2
1MTM-USBStem_right_anglezoudio_footprints:SAMTEC_PCIE-064-02-X-D-RAJ15
1PJ-324Mzoudio_footprints:PJ-324MJ10
1PinHeader 02x03Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ3
1PinHeader 02x05Connector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ8
1ZOUDIOzoudio_footprints:ZOUDIO25mmLOGO1

More from ZOUDIO/AIO438

3
  • 4 layers121 × 60 mmAIO438, the printed circuit board in 3D

    AIO438

    ZOUDIO/AIO438

    4x38W amplifier with DSP and BT

    170 parts6GPL-3.0
  • 2 layers59.8 × 129 mmAIO IO board, the printed circuit board in 3D

    AIO IO board

    ZOUDIO/AIO438

    4x38W amplifier with DSP and BT

    36 parts6GPL-3.0
  • 2 layers121 × 60 mmAIO438-pogo guide, the printed circuit board in 3D

    AIO438-pogo guide

    ZOUDIO/AIO438

    4x38W amplifier with DSP and BT

    14 parts6GPL-3.0

Similar boards

  • 2 layers74.1 × 66.5 mmSHVC SOUND ESP32, the printed circuit board in 3D

    SHVC SOUND ESP32

    SHIMA-R7/SHVC-SOUND-Player

    Arduino Uno R3 / Nano (ATmega328P・5Vロジック) で SHVC-SOUND(スーファミ音源モジュール: S-SMP + S-DSP + ARAM + DAC)を駆動し、 .spc ファイルを実チップで再生するプロジェクト。音声は TDA7053A(ステレオBTL)で増幅し3.5mmジャックへ出力する。

    33 parts
  • 2 layers44.5 × 46.9 mmOSO SWAT B1-jig, the printed circuit board in 3D

    OSO SWAT B1-jig

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    31 parts2.1k
  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    31 parts1kGPL-3.0
  • 2 layers191 × 98.5 mmMacroKeypad, the printed circuit board in 3D

    MacroKeypad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    31 parts915
  • 2 layers39 × 45.2 mmCH32V003F4P6-R0-1v1, the printed circuit board in 3D

    CH32V003F4P6-R0-1v1

    openwch/ch32v003

    CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

    31 parts599
  • 2 layers26.7 × 27.9 mmBreakout board, the printed circuit board in 3D

    Breakout board

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    31 parts546MIT
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    31 parts447MIT
  • 2 layers77.2 × 69.8 mmCubesatsim solar, the printed circuit board in 3D

    Cubesatsim solar

    alanbjohnston/CubeSatSim

    CubeSatSim, the AMSAT CubeSat Simulator

    31 parts419GPL-3.0

Questions

How big is the AIO438 PCB?

It measures 121 × 102.9 mm and has 2 copper layers, 0.57 mm thick.

What parts does the AIO438 use?

31 parts, built around the PJ-324M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AIO438 KiCad files?

From the ZOUDIO/AIO438 repository on GitHub, at the commit this page was made from: the board is PCB/Mainboard-TPCB/AIO438.kicad_pcb and its schematic PCB/Input_output_board/AIO_IO_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AIO438 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).