Skip to the content
4 layers59 × 20 mmCH397, the printed circuit board in 3D
Size
59 × 20 mm
Copper layers
4
Thickness
1.65 mm
Parts
29
Nets
43
Pads
131
Tracks, vias
447, 118
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
17 Feb 2026
Updated
7 Nov 2026

Overview

CH397 is an open-source printed circuit board by zOnlyKroks, from the zOnlyKroks/pcb-consortium repository on GitHub, published under the CC0-1.0 licence. It is a 4-layer board of 59 × 20 mm with 29 parts on 43 nets, routed with 447 tracks and 118 vias.

It is built around the CH397A, HC-WK88-H16-DB and HR641680E. Its parts include 14 capacitors, 10 resistors, 1 IC, 1 connector and 1 inductor.

Main components

3

README

README.md

PCB / Circuit Designs

Support & Issues

If something is broken, unclear, or you need help assembling:

  • Open a GitHub Issue
  • I’ll try to help when I can

Use at your own risk 🙂

Parts

29
QtyValueFootprintReferences
61uFCapacitor_SMD:C_0603_1608MetricC2, C3, C6, C7, C9, C12
5100nFCapacitor_SMD:C_0603_1608MetricC8, C10, C11, C13, C14
475Resistor_SMD:R_0603_1608MetricR1, R2, R3, R4
218pFCapacitor_SMD:C_0603_1608MetricC4, C5
21kResistor_SMD:R_0603_1608MetricR13, R14
222Resistor_SMD:R_0603_1608MetricR11, R12
25.1kResistor_SMD:R_0603_1608MetricR9, R10
11000pFCapacitor_SMD:C_0603_1608MetricC1
125 MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1CH397Alcsc_footprints:C7465328_QFN-24_L4_0-W4_0-P0_50-BL-EP2_8U1
1HC-WK88-H16-DBlcsc_footprints:C7501824_RJ45-TH_HC-WK88-H16-DBRJ1
1HR641680Elcsc_footprints:C189555_XFMR-SMD_HR641680EL1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J3

More from zOnlyKroks/pcb-consortium

12
  • 4 layers66 × 155 mmWK-3, the printed circuit board in 3D

    WK-3

    zOnlyKroks/pcb-consortium

    339 partsCC0-1.0
  • 2 layers117.1 × 40.9 mmCH224-K Panel, the printed circuit board in 3D

    CH224-K Panel

    zOnlyKroks/pcb-consortium

    283 partsCC0-1.0
  • 4 layers165 × 125 mmVideoConv V1, the printed circuit board in 3D

    VideoConv V1

    zOnlyKroks/pcb-consortium

    236 partsCC0-1.0
  • 4 layers191 × 130 mmFilltest, the printed circuit board in 3D

    Filltest

    zOnlyKroks/pcb-consortium

    193 partsCC0-1.0
  • 4 layers230 × 77.6 mmBTBox panel, the printed circuit board in 3D

    BTBox panel

    zOnlyKroks/pcb-consortium

    188 partsCC0-1.0
  • 4 layers126.3 × 115.4 mmBTBox ADAU1701, the printed circuit board in 3D

    BTBox ADAU1701

    zOnlyKroks/pcb-consortium

    133 partsCC0-1.0
  • 4 layers64.5 × 74.8 mmBluetooth Box V3, the printed circuit board in 3D

    Bluetooth Box V3

    zOnlyKroks/pcb-consortium

    129 partsCC0-1.0
  • 4 layers128 × 60 mmNixiClockV1, the printed circuit board in 3D

    NixiClockV1

    zOnlyKroks/pcb-consortium

    117 partsCC0-1.0

Similar boards

  • 4 layers80 × 105.5 mmNetdaq, the printed circuit board in 3D

    Netdaq

    Gherkin/netdaq

    913 partsCERN-OHL-P-2.0
  • 4 layers28.4 × 47.9 mmEasyduino ESP32, the printed circuit board in 3D

    Easyduino ESP32

    Hanqaqa/Easyduino

    Easily dive into different PCB KiCad designs of the most popular microcontroller devboards

    29 parts755CERN-OHL-P-2.0
  • 4 layers63.5 × 21 mmNard sam, the printed circuit board in 3D

    Nard sam

    killergeek/nard

    nard a dual sim/sam card interface for the flipper zero

    29 parts108MIT
  • 4 layers36.8 × 38.1 mmCm4 ipad display adapter, the printed circuit board in 3D

    Cm4 ipad display adapter

    EvanKrall/pipad

    A PCB for putting a Raspberry Pi CM4 inside a 1st-generation iPad.

    29 parts60
  • 4 layers97 × 97 mmPCBA ZONA TOUCH, the printed circuit board in 3D

    PCBA ZONA TOUCH

    intechstudio/grid-hardware

    29 parts59GPL-3.0
  • 4 layers26.8 × 14.8 mmRpi nrf52811, the printed circuit board in 3D

    Rpi nrf52811

    alvarop/chaac

    This is a work in progress for a wireless weather station project.

    29 parts21MIT
  • 4 layers100 × 25 mmRf switch dpdt, the printed circuit board in 3D

    Rf switch dpdt

    greatscottgadgets/misc

    miscellaneous Great Scott Gadgets projects

    29 parts21GPL-2.0
  • 4 layers45 × 35.2 mmDominoDisk SMD Angled, the printed circuit board in 3D

    DominoDisk SMD Angled

    colinleroy/BurgerDisk

    A daisy-chainable Smartport hard drive for the Apple II

    29 parts20

Questions

How big is the CH397 PCB?

It measures 59 × 20 mm and has 4 copper layers, 1.65 mm thick.

What parts does the CH397 use?

29 parts, built around the CH397A, HC-WK88-H16-DB and HR641680E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CH397 KiCad files?

From the zOnlyKroks/pcb-consortium repository on GitHub, at the commit this page was made from: the board is Networking/CH397/CH397.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the CH397 design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).