
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A repository of all of the labs Zoe made at Harvey Mudd College for Microprocessors (E155)
Zoe PCB is an open-source printed circuit board by zoe-worrall, from the zoe-worrall/e155_labs repository on GitHub. It is a 2-layer board of 27.9 × 28.6 mm with 14 parts on 21 nets, routed with 85 tracks and 16 vias.
Its parts include 5 resistors, 5 diodes, 2 connectors and 1 IC.
This repository contains source code related to E155: Microprocessor-based Systems (MicroPs) at Harvey Mudd College. See the course website for more details.
My website can be found at this link.
Check out QuACK, my undergraduate senior Clinic project. The Quantum Analog Control Kit was made for HRL Laboratories' quantum device for spin-qubits.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5 |
| 5 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D5 |
| 2 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2 |
| 1 | LOGO | Zoe_PCB:zoe_logo | G*** |
| 1 | ~ | Zoe_PCB:Zoe_DS1722 | U1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 27.9 × 28.6 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the zoe-worrall/e155_labs repository on GitHub, at the commit this page was made from: the board is pcb_kicad/Zoe_PCB/Zoe_PCB.kicad_pcb and its schematic pcb_kicad/Zoe_PCB/Zoe_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask zoe-worrall before reusing the design.