

Enc hid kicad v10
Frontpanel Generator for KiCad PCBs
- Size
- 90 × 150 mm
- Copper layers
- 2
- Thickness
- 1.58 mm
- Parts
- 98
- Nets
- 63
- Pads
- 383
- Tracks, vias
- 902, 76
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 9 Apr 2026
- Updated
- 7 Nov 2026
Overview
Enc hid kicad v10 is an open-source printed circuit board by znuh, from the znuh/kicad-frontpanel-generator repository on GitHub, published under the MIT licence. It is a 2-layer board of 90 × 150 mm with 98 parts on 63 nets, routed with 902 tracks and 76 vias.
It is built around the AP7313-33SRG and ESD5V3U2U-03F. Its parts include 33 switches, 24 resistors, 15 capacitors, 11 diodes and 2 ICs. It belongs with the STM32 boards of this library.
Main components
2AP7313-33SRG
SOT-23R-40℃~+85℃@(Ta) 1 150mA 150mV@(150mA) 3.3V 65dB@(100Hz) 65uA 6V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-23R Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsESD5V3U2U-03F
SOTFL320kV ESD Ultra-Low Capacitance Uni-Directional TVS Diode ArrayInfineon TechnologiesUncategorised
README
README.mdKiCad Frontpanel Generator
KiCad Frontpanel Generator creates matching front panels for KiCad PCBs automatically. The PCB designer defines cut-outs and labels in unused layers of footprints and in the PCB. The Front Panel Generator then uses the shapes from these layers to generate a suitable cover plate.
Why a web app instead of a KiCad Plugin?
When I made the initial prototype in 2025, the old plugin API was dying deprecated and the new API still struggling to be born. Creating a derivative of a PCB without replacing/overwriting the original PCB was not possible. I already had a KiCad PCB parser in JS from another project, so I decided to build upon this. Also, this should make SVG output (laser-cut frontpanels!) easier.
Status
Warning: This is work in progress. The UI still needs some improvement and more testing. There is no documentation or manual yet.
Supported KiCad versions: 9, 10. Older versions might work, but the output will be a potentially faulty KiCad 9 PCB file.
Example
Trying it
You can see/try it here without cloning the repo: znu.nz/fpgen
- Load enc-hid_kicad-v10.kicad_pcb from the examples directory in the FP generator
- Save the resulting KiCad PCB
- Load the saved file in KiCad / pcbnew
Funding
This project is funded through NGI0 Commons Fund, a fund established by NLnet with financial support from the European Commission's Next Generation Internet program. Learn more at the NLnet project page.
Parts
98| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R24, R25, R26, R27, R28 +8 |
| 14 | BTN 6mm | footprints:SW_PUSH_6mm_H9.5mm | SW8, SW9, SW11, SW12, SW15, SW16, SW19, SW20, SW23, SW24, SW27, SW28, SW31, SW32 |
| 11 | BTN 12mm | footprints:SW_PUSH-12mm_Wuerth-430476085716 | SW1, SW2, SW3, SW4, SW6, SW10, SW14, SW18, SW22, SW26, SW30 |
| 10 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C8, C9, C10, C11, C12, C13, C14, C15, C16, C18 |
| 9 | APA-106-F5 | footprints:LED_D5.0mm-4_RGB | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 8 | EC11E | footprints:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_CircularMountingHoles | SW5, SW7, SW13, SW17, SW21, SW25, SW29, SW33 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_Pad | H1, H2, H3, H4 |
| 3 | Fiducial | Fiducial:Fiducial_1.5mm_Mask3mm | FID1, FID2, FID3 |
| 2 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1, C19 |
| 2 | 4.7uF/10V | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 1 | 22uF/10V | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | AP7313-33SRG | Package_TO_SOT_SMD:SOT-23-3 | U2 |
| 1 | ESD5V3U2U | Package_TO_SOT_SMD:Infineon_PG-TSFP-3-1 | D20 |
| 1 | FerriteBead | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | LED | Diode_SMD:D_0603_1608Metric | D10 |
| 1 | STM32C071CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SWCLK | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | SWDIO | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | Vtg | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
Similar boards
- 2 layers17.8 × 43.2 mm

- 2 layers24 × 18 mm

Usb2serial autovtg
znuh/usb2serial-autovtg
USB to serial converter with automatic target voltage detection, buffered IOs, 1.8V to 5V support and backflow current protection
38 parts9CC-BY-SA-4.0 - 2 layers58 × 41 mm

- 2 layers

- 2 layers53.3 × 15.2 mm

- 2 layers225 × 356.9 mm

Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
98 parts1.3k - 2 layers99.9 × 99.9 mm

- 2 layers48 × 48 mm

Questions
How big is the Enc hid kicad v10 PCB?
It measures 90 × 150 mm and has 2 copper layers, 1.58 mm thick.
What parts does the Enc hid kicad v10 use?
98 parts, built around the AP7313-33SRG and ESD5V3U2U-03F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Enc hid kicad v10 KiCad files?
From the znuh/kicad-frontpanel-generator repository on GitHub, at the commit this page was made from: the board is examples/enc-hid_kicad-v10.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Enc hid kicad v10 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
