2 layers143.5 × 115.5 mm
SofleKeyboard
josefadamcik/SofleKeyboard
A split keyboard based on Lily58, Crkbd and Helix keyboards
89 parts2.6k
2 layers152.4 × 76.2 mm
Switch42
zk-phi/morpho-keyboard1An experimental keyboard for tasting multiple layouts with hot-swapping sockets
- Size
- 152.4 × 76.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 53
- Pads
- 420
- Tracks, vias
- 722, 36
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Jan 2020
- Updated
- 12 Jun 2020
Overview
Switch42 is an open-source printed circuit board by zk-phi, from the zk-phi/morpho-keyboard repository on GitHub. It is a 2-layer board of 152.4 × 76.2 mm with 89 parts on 53 nets, routed with 722 tracks and 36 vias.
Its parts include 49 switches, 30 diodes, 1 IC and 1 connector. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 40 | SW_PUSH | phi-kbd-library:_MX_Hotswap-1.00u-irreversible-smaller-pad | SW2, SW10, SW12, SW13, SW14, SW15, SW16, SW17, SW19, SW20, SW21, SW22, SW24, SW25, SW26, SW27 +24 |
| 30 | D | phi-kbd-library:D_SMD-irreversible | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +14 |
| 8 | SW_PUSH | phi-kbd-library:MX_1.00u-irreversible | SW4, SW11, SW18, SW23, SW28, SW35, SW42, SW45 |
| 8 | Val** | phi-kbd-library:M2_SCREW_HOLE | Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref** |
| 1 | MJ-4PP-9 | phi-kbd-library:MJ-4PP-9-irreversible | J1 |
| 1 | ProMicro | phi-kbd-library:ProMicro_Reversed_Conthrough-irreversible | U1 |
| 1 | SW_PUSH | phi-kbd-library:ResetSW-irreversible | SW1 |
Questions
How big is the Switch42 PCB?
It measures 152.4 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Switch42 use?
89 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Switch42 KiCad files?
From the zk-phi/morpho-keyboard repository on GitHub, at the commit this page was made from: the board is pcb/switch42.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Switch42 design in my own project?
Its repository states no licence, so its author keeps all rights: ask zk-phi before reusing the design.
Similar boards
- 2 layers61 × 74 mm
- 2 layers59.4 × 138.3 mm
- 2 layers121.9 × 172.7 mm
- 2 layers58 × 65 mm
- 2 layers75.5 × 52.5 mm
- 2 layers87 × 71 mm
- 2 layers100 × 100 mm
BulkyMIDI-32 Audio Switch
tebl/BulkyMIDI-32
A HW build of the MT32-PI project, allowing you to emulate a Roland MT-32 using a Raspberry Pi. Includes enough additional modules to build a MIDI-mountain as well as adapters for connecting to most things retro.
89 parts80CC-BY-SA-4.0