4 layers44.8 × 55.9 mm
Main project
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915
4 layers39.9 × 14.1 mm
Touch stand
Ziucay/touch-stand1DIY capacitive buttons
- Size
- 39.9 × 14.1 mm
- Copper layers
- 4
- Thickness
- 1.66 mm
- Parts
- 20
- Nets
- 18
- Pads
- 45
- Tracks, vias
- 40, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Jan 2026
- Updated
- 12 Feb 2026
Overview
Touch stand is an open-source printed circuit board by Ziucay, from the Ziucay/touch-stand repository on GitHub. It is a 4-layer board of 39.9 × 14.1 mm with 20 parts on 18 nets, routed with 40 tracks and 0 vias.
Its parts include 2 ICs, 2 connectors and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.
README
README.mdtouch-stand
DIY capacitive buttons
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Metal pad mount | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | G0, G1, G2, G3, G4, G8, G9, G20, G21 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 3.3v | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | H11 |
| 1 | Capacitive sensor | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | H2 |
| 1 | ESP32-C3_SUPERMINI_TH | ESP32-C3_SUPERMINI_TH:MODULE_ESP32-C3_SUPERMINI_TH | U1 |
| 1 | I2C | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1 |
| 1 | Power connector | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J2 |
| 1 | ~ | touch-stand-lib:LM2596S Module | U2 |
The 16 most common of 20 parts.
Questions
How big is the Touch stand PCB?
It measures 39.9 × 14.1 mm and has 4 copper layers, 1.66 mm thick.
What parts does the Touch stand use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Touch stand KiCad files?
From the Ziucay/touch-stand repository on GitHub, at the commit this page was made from: the board is touch-stand/touch-stand.kicad_pcb and its schematic touch-stand/touch-stand.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Touch stand design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ziucay before reusing the design.
Similar boards
- 4 layers22.9 × 50.8 mm
Lg hvac esp32
JanM321/esphome-lg-controller
Wired controller for LG HVAC units using ESPHome and ESP32
20 parts2920BSD - 4 layers23.3 × 21.6 mm
- 4 layers21.5 × 42 mm
Indicator board
RespiraWorks/Ventilator
Fully-featured ICU ventilator design, optimized for manufacture using commonly available components and free to license.
20 parts169Apache-2.0 - 4 layers71.8 × 56.5 mm
Arduino 387SX V2
dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs
20 parts114 - 4 layers58.3 × 54 mm
PSA Harness
lukasloetkolben/OpenpilotHardware
Welcome to the Openpilot Hardware Collection!
20 parts95MIT - 4 layers20.5 × 10.5 mm
ADC B v1
macaba/TheManhattanToolkit
Input R - RNCF0603DTE10R0 (10 ohm) Input CM C - CGA3E1C0G2A472J080AC (4.7nF) Input DM C - DNP
20 parts94MIT - 4 layers34.5 × 42.2 mm
