2 layers120 × 76.8 mm
2 layers25.4 × 52.1 mm
FakeTecv5
zinklink/KiCad- Size
- 25.4 × 52.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 34
- Pads
- 117
- Tracks, vias
- 196, 28
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Aug 2025
- Updated
- 12 Dec 2025
Overview
FakeTecv5 is an open-source printed circuit board by zinklink, from the zinklink/KiCad repository on GitHub. It is a 2-layer board of 25.4 × 52.1 mm with 36 parts on 34 nets, routed with 196 tracks and 28 vias.
It is built around the XB8089D0 and SI2312. Its parts include 11 connectors, 8 resistors, 4 capacitors, 2 switches and 1 IC. It belongs with the nRF52 and nRF5x boards of this library.
Main components
2Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R7, R8 |
| 4 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4 |
| 3 | , , | ||
| 3 | SI2312 | SMD_PAD:TSOT-23_HandSoldering_Updated | T1, T2, T3 |
| 2 | 10M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | Battery Connector JST 1.25 | Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J9 |
| 1 | Battery Holes | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | GPS Pins | SMD_PAD:SMD_PAD_4x1 | J14 |
| 1 | I2C Oled screen | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Jumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | LOGO | SMD_PAD:Shimon_kicad | G*** |
| 1 | Lora - left pins | SMD_PAD:SMD_Pad_Row_P2.00_8x1_longer | J3 |
| 1 | Lora - right pins | SMD_PAD:SMD_Pad_Row_P2.00_8x1 | J4 |
| 1 | Nice!nano - left pins | SMD_PAD:SMD_Pad_Row_P2.54_13x1 | J1 |
| 1 | Nice!nano - right pins | SMD_PAD:SMD_Pad_Row_P2.54_13x1 | J2 |
| 1 | Reset | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | T1 Drain - SMD | SMD_PAD:SMD_PAD_1x1 | J6 |
| 1 | T2 Drain - SMD | SMD_PAD:SMD_PAD_1x1 | J7 |
| 1 | T3 Drain - SMD | SMD_PAD:SMD_PAD_1x1 | J8 |
| 1 | XB8089D0 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm | U1 |
The 34 most common of 36 parts.
More from zinklink/KiCad
5- 2 layers27.4 × 22.9 mm
- 2 layers
- 2 layers23.3 × 23 mm
- 2 layers
Similar boards
- 2 layers25.4 × 52.1 mm
- 2 layers25.4 × 52.1 mm
FakeTecv5
mofosyne/roTec_pcb
A low-cost nrf52 device, targeting cases that supports rotary encoder. Forked from jtljac's take on faketec v5
35 parts17CERN-OHL-P-2.0 - 2 layers36.6 × 107.5 mm
E290 AirModule Daughter
mikechristiansen/GxAirCom_E290
GxAircom aims to be a complete and open source implementation of the FANET+ (Fanet + Flarm) protocol running on readily available cheap lora modules and interfacing with mobile phones via Bluetooth.
23 parts - 2 layers35.6 × 64 mm
- 2 layers26 × 120.3 mm
Soil sensor 2
GewoonMaarten/soil-sensor
Schematic and PCB for a capacitive soil moisture sensor 🌱.
29 parts10 - 4 layers33.2 × 85.9 mm
Sensor board
owl-and-goat/sensor-board
general-purpose thread-based iot home automation sensor board
104 parts - 2 layers24.5 × 33.5 mm
- 2 layers48.3 × 33.5 mm
Questions
How big is the FakeTecv5 PCB?
It measures 25.4 × 52.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FakeTecv5 use?
36 parts, built around the XB8089D0 and SI2312. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FakeTecv5 KiCad files?
From the zinklink/KiCad repository on GitHub, at the commit this page was made from: the board is fakeTec_pcb/design_files/fakeTecv5.kicad_pcb and its schematic BME280/BME280.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FakeTecv5 design in my own project?
Its repository states no licence, so its author keeps all rights: ask zinklink before reusing the design.