

Pcb mini
Test dev board PCB for fun
- Size
- 78.7 × 26.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 49
- Pads
- 165
- Tracks, vias
- 406, 241
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 23 Jul 2023
- Updated
- 7 Jul 2026
Overview
Pcb mini is an open-source printed circuit board by zhiyb, from the zhiyb/test_dev_board repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 78.7 × 26.7 mm with 50 parts on 49 nets, routed with 406 tracks and 241 vias.
It is built around the ATTINY84A-SSF, ESP-12F and AP2112K-3.3, with the PCA9306D, DMG2301L and DMG2302U among its other parts. Its parts include 18 resistors, 11 capacitors, 5 ICs, 4 connectors and 3 transistors. It belongs with the ESP8266 and AVR (ATmega, ATtiny) boards of this library.
Main components
6ATTINY84A-SSF
SOIC-14-40℃~+125℃ 1.8V~5.5V 10bit 12 20MHz 512Byte 8 Bit 8KB AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi ModulesAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedPCA9306D
SO-8-40℃~+105℃ 1 1.8V~5.5V 1V~3.6V 2 2Mbps Automatic direction detection、Output enable high-impedance Bidirectional Level translator Open-drain SMBus、I2C SO-8 Translators, Level Shifters ROHSNXP SemiconductorsTranslators, Level ShiftersDMG2301L
SOT-23-55℃~+150℃ 1 P-Channel 1.2V 1.5W 150mΩ@2.5V 20V 3A 5.5nC@4.5V P-Channel SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsDMG2302U
SOT-23-55℃~+150℃ 1 N-channel 120mΩ@4.5V 1V 20V 4.2A 57.7pF 594.3pF 64.5pF 7nC@4.5V 800mW SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdtest_dev_board
Test dev board PCB for fun
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8, C10, C11 |
| 10 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R6, R10, R13, R14, R15, R16, R17, R18 |
| 4 | 2k2 | Resistor_SMD:R_0402_1005Metric | R7, R8, R11, R12 |
| 3 | 330R | Resistor_SMD:R_0402_1005Metric | R3, R4, R5 |
| 2 | DMG2301L | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | LOGO | LOGO | , |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2 |
| 1 | 18650-Socket | Library:18650-Socket | BT1 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | ATtiny84A-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.00mm:PinHeader_1x06_P2.00mm_Vertical | J2 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_2.00mm:PinSocket_1x08_P2.00mm_Vertical | J3 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | DMG2302U | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ESP-12F | RF_Module:ESP-12E | U5 |
| 1 | LED_RGBA | LED_SMD:LED_Kingbright_APFA3010_3x1.5mm_Horizontal | D1 |
| 1 | PCA9306 | Package_SO:SSOP-8_2.95x2.8mm_P0.65mm | U4 |
| 1 | SHT4x | Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_E-Switch_TL3301NxxxxxG | SW1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | USB Charger Board | Library:USB-Charger-Board-2 | BD1 |
More from zhiyb/test_dev_board
2- 2 layers100 × 100 mm

- 4 layers50 × 50 mm

Similar boards
- 2 layers69 × 72 mm

MMv3
MrCroesus/MMv3
MMv3 is the 3rd generation robot platform used to teach the IEEE Micromouse DeCal at UC Berkeley. It was designed with usability, manufacturability, size, and cost in mind.
47 parts16Apache-2.0 - 4 layers45.7 × 90.3 mm

- 2 layers99.5 × 124.8 mm

B Sides 2024
OklahomaOpenSourceHardware/OKC-OSH-2024-Badge
2024 badge for Oklahoma PCB Tech Conferences
151 parts3 - 2 layers60 × 44 mm

Resistive BMS-4s
c3am/resistive-BMS
an open source 4s BMS based on the CH32V003 microcontroller
64 parts1 - 4 layers99.9 × 99.9 mm

BiasReceiver
snr-laboratory/snrlab-microfab-trial0
Trial run of micro-fabrication: interposer, individual FET, ACF, IC packaging
112 parts1 - 2 layers96 × 90 mm

- 4 layers51.9 × 108.5 mm

ESP 32 Battle 4h
samcwitte/PCB-Design-Battle
This is a repository containing my PCB designs for a 2-hour PCB battle I participated in with Predictable Designs on YouTube.
70 partsMIT - 2 layers100 × 100 mm

Questions
How big is the Pcb mini PCB?
It measures 78.7 × 26.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pcb mini use?
50 parts, built around the ATTINY84A-SSF, ESP-12F, AP2112K-3.3 and PCA9306D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcb mini KiCad files?
From the zhiyb/test_dev_board repository on GitHub, at the commit this page was made from: the board is pcb_esp/pcb_mini.kicad_pcb and its schematic pcb/esp8266.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcb mini design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).