
Armpoe
zeroping/PoE-STM32F107
A Power-over-Ethernet board with an STM32F107 for processing and ethernet and a header for all I/O

A Power-over-Ethernet board with an STM32F107 for processing and ethernet and a header for all I/O
AdapterBreadboard is an open-source printed circuit board by zeroping, from the zeroping/PoE-STM32F107 repository on GitHub. It is a 2-layer board of 60 × 60 mm with 13 parts on 46 nets, routed with 662 tracks and 265 vias.
Its parts include 4 connectors, 4 switches, 2 resistors, 1 capacitor and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | CONN_19 | SIL-18 | P101, P102 |
| 1 | 0.1uF | c_0603 | C101 |
| 1 | 10K | c_0603 | R101 |
| 1 | 220 | SM0603 | R102 |
| 1 | Boot0 | tact_sw_4.3mm | SW101 |
| 1 | CONN_2 | PIN_ARRAY_2X1 | P103 |
| 1 | CONN_3 | PIN_ARRAY_3X1 | K102 |
| 1 | LED | LED-0805 | D101 |
| 1 | PCI-E4X_EDGE | con-pci_express(pci-e)-PCI-E_64 | JP101 |
| 1 | PWR | PIN_ARRAY_3X1 | K101 |
| 1 | Reset | tact_sw_4.3mm | SW102 |
| 1 | USB | mincro-usb | J101 |

zeroping/PoE-STM32F107
A Power-over-Ethernet board with an STM32F107 for processing and ethernet and a header for all I/O



samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments


willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 60 × 60 mm and has 2 copper layers, 1.6 mm thick.
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the zeroping/PoE-STM32F107 repository on GitHub, at the commit this page was made from: the board is adapterBreadboard/adapterBreadboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask zeroping before reusing the design.