2 layers
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT
2 layers14.5 × 33 mm
Dcdc breakout
ZeroPhone/BreakoutPCBMockups2Chinese breakout mockups done in KiCad to make 3D models (might be used as base for custom breakouts)
- Size
- 14.5 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 9
- Pads
- 32
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 9 Jun 2017
- Updated
- 26 Jun 2017
Overview
Dcdc breakout is an open-source printed circuit board by ZeroPhone, from the ZeroPhone/BreakoutPCBMockups repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 14.5 × 33 mm with 12 parts on 9 nets.
Its parts include 5 capacitors, 3 resistors, 1 IC, 1 diode and 1 connector. It belongs with the interfaces and adapters and power boards of this library.
README
README.mdBreakoutPCBMockups
Chinese breakout mockups done in KiCad to make 3D models for ZeroPhone-PCBs repository (the boards created can be used as base for custom breakouts, too).
Board photos and dimensions
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R | Resistors_SMD:R_0603 | R1, R2, R3 |
| 2 | C | Capacitors_SMD:C_0805 | C2, C4 |
| 2 | C | Capacitors_SMD:C_0603 | C1, C3 |
| 1 | C | Capacitors_SMD:C_1206 | C5 |
| 1 | DC_DC_BREAKOUT | dcdc_breakout:DC-DC-BREAKOUT | U1 |
| 1 | G2116 | SMD_Packages:SOIC-8-N | J1 |
| 1 | LED | LEDs:LED_0603 | D1 |
| 1 | L_Core_Ferrite | dcdc_breakout:INDUCTOR | L1 |
Questions
How big is the Dcdc breakout PCB?
It measures 14.5 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dcdc breakout use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dcdc breakout KiCad files?
From the ZeroPhone/BreakoutPCBMockups repository on GitHub, at the commit this page was made from: the board is dcdc_breakout/dcdc_breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dcdc breakout design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers40 × 15 mm
Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm
- 2 layers26 × 16.9 mm
- 2 layers49 × 25 mm
5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm
Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696