
Yusynth adsr
zero-emission/Eurorack_Clones
Clones and remakes of Eurorack synth modules which I found interesting and useful

Clones and remakes of Eurorack synth modules which I found interesting and useful
Wasp 0.5 is an open-source printed circuit board by zero-emission, from the zero-emission/Eurorack_Clones repository on GitHub. It is a 2-layer board of 50 × 80.5 mm with 61 parts on 48 nets, routed with 262 tracks and 0 vias.
It is built around the LM13700M and AMS1117-5.0. Its parts include 27 resistors, 14 capacitors, 7 connectors, 3 ICs and 3 diodes. It belongs with the audio and music boards of this library.
Clones and remakes of Eurorack synth modules which I found interesting and useful
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 33K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R10, R12, R19, R22 |
| 4 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R5, R7, R13, R25 |
| 4 | 100n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C6, C9, C14 |
| 4 | 1n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C8, C10, C11, C12 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15, R16, R17 |
| 3 | 220n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C4, C5 |
| 3 | DIODE | Diode_THT:D_T-1_P5.08mm_Horizontal | D1, D2, D3 |
| 2 | 100K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV9, RV18 |
| 2 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R8 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R26, R27 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R11, R21 |
| 2 | 33K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R28, R29 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R20 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C13 |
| 1 | 1M | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | GAIN1 |
| 1 | 4069 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U1 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C7 |
| 1 | 4K7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R24 |
| 1 | 4K7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R14 |
| 1 | 51K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R23 |
| 1 | 68p | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | CUT_POT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | CV | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | Eurorack_16_pin | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J7 |
| 1 | FLT_MODE_SWT | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | INPUT_SWT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | LM13700 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U2 |
| 1 | OUT_SWT | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | RES_POT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |

zero-emission/Eurorack_Clones
Clones and remakes of Eurorack synth modules which I found interesting and useful

zero-emission/Eurorack_Clones
Clones and remakes of Eurorack synth modules which I found interesting and useful

zero-emission/Eurorack_Clones
Clones and remakes of Eurorack synth modules which I found interesting and useful

zero-emission/Eurorack_Clones
Clones and remakes of Eurorack synth modules which I found interesting and useful

zero-emission/Eurorack_Clones
Clones and remakes of Eurorack synth modules which I found interesting and useful


mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules


clacktronics/EuroClack_BYOM_Modules
In this repository is all the modules in the book for Build Your Own Modular the Clacktronics ring binder product to build your own modular synthesizer from scratch. clacktronics.co.uk/byom/.


gligli/overcycler
Affordable DIY polyphonic hybrid single cycle / analog synthesizer


It measures 50 × 80.5 mm and has 2 copper layers, 1.6 mm thick.
61 parts, built around the LM13700M and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the zero-emission/Eurorack_Clones repository on GitHub, at the commit this page was made from: the board is WASP_filter/wasp/wasp_0.5.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask zero-emission before reusing the design.