

Sensor board light
- Size
- 30 × 55.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 12
- Pads
- 37
- Tracks, vias
- 65, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Feb 2026
- Updated
- 26 Aug 2026
Overview
Sensor board light is an open-source printed circuit board by ZER0-cmd, from the ZER0-cmd/BOREALIS-1 repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 30 × 55.1 mm with 15 parts on 12 nets, routed with 65 tracks and 1 via.
Its parts include 4 resistors, 2 capacitors, 2 ICs and 2 connectors. It belongs with the sensors and measurement boards of this library.
README
README.md%20(2).png)
Från klassrummen till rymden, en röd tråd från nyfikenhet till framtidens ingenjörer!
BOREALIS är ett projekt för högstadieelever som syftar till att introducera unga till teknik och rymdforskning genom praktiska, rymdnära experiment anpassade till deras kunskapsnivå. Genom att designa och bygga små experiment som skickas upp med stratosfäriska ballonger får eleverna uppleva ett verkligt rymdprojekt, vilket ger dem en första inblick i rymdteknik och ingenjörskonst. Projektet är utformat för att passa den grundläggande förståelse för naturvetenskap som elever på högstadiet har, och fungerar som en inspirerande introduktion till STEM-ämnen och framtida rymdrelaterade projekt.
.jpg)
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R5, R6 |
| 3 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_Pad | H1, H2, H3 |
| 2 | Conn_01x04_Pin | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J1, J3 |
| 2 | MAGNETIC POGO CONN. | batteryholder:MAGNETIC POGO CONN. | U1, U2 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | LOGO | LOGO | G*** |
| 1 | R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | ~ | batteryholder:SENSOR-SMD_LTR-390UV-01 | LTR-390UV-01 |
More from ZER0-cmd/BOREALIS-1
9- 2 layers59.5 × 80.5 mm

- 2 layers32.3 × 32.2 mm

- 2 layers30 × 28.2 mm

- 2 layers30 × 28.2 mm

- 2 layers30 × 28.1 mm

- 2 layers30 × 28.2 mm

- 2 layers30 × 28.1 mm

- 2 layers30 × 28.2 mm

- 2 layers30 × 28.1 mm

Similar boards
- 2 layers19 × 76 mm

Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
15 parts3kApache-2.0 - 2 layers26.7 × 62.2 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
15 parts1kGPL-3.0 - 2 layers100 × 44 mm

Videoslot
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
15 parts1k - 2 layers91 × 51 mm

BusinessCard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
15 parts915 - 2 layers24.3 × 57.9 mm

Flosspods pro flex
kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.
15 parts609WTFPL - 2 layers20.3 × 15.2 mm

L0 Load
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
15 parts546MIT - 2 layers68 × 50 mm

EleLab v2 PowerFeed
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
15 parts531GPL-3.0 - 2 layers50.8 × 35.6 mm

Questions
How big is the Sensor board light PCB?
It measures 30 × 55.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sensor board light use?
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensor board light KiCad files?
From the ZER0-cmd/BOREALIS-1 repository on GitHub, at the commit this page was made from: the board is PCB/sensor-board-light/sensor-board-light.kicad_pcb and its schematic PCB/BOREALIS_MOTHERBOARD/BOREALIS_MOTHERBOARD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensor board light design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).