
Daughter board left
zegonix/qua-ken
design resources for the staggered column split keyboard qua-ken

design resources for the staggered column split keyboard qua-ken
Pcb right is an open-source printed circuit board by zegonix, from the zegonix/qua-ken repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 143.7 × 114.3 mm with 90 parts on 91 nets, routed with 431 tracks and 180 vias.
Its parts include 31 diodes, 14 capacitors, 8 resistors, 3 connectors and 2 ICs. It belongs with the keyboards and input boards and the STM32 boards of this library.
This repository has been moved to another git server.
this repository holds the design resources for the open source keyboard 'qua-ken'. The qua-ken is heavily inspired by Josef Adamčík's Sofle and copies its layout. The qua-ken is basically a Sofle modified to meet my custom keyboard standards. The PCB is split into main board and daughter board which holds the connectors. The qua-ken uses more a powerful ARM controller with much more program memory allowing the use of more software features. For the connection of the two halves a 4P4C connector is used as the TRRS connector shorts some of the lines when plugging/unplugging the cable. Currently planned are PCB silicone dumbbell gasket mount and plate top mount. The case is planned as screwless design opening from the top for ease of access. I also think about using the ball catch system gaining popularity, but since I have no experience with mechanical design, I am unsure whether I can manage that in a reasonable amount of revisions.
I just started and am currently working on the PCB. Once the PCB is tested, I will start with the case.
I just got the PCBs, it works perfectly fine appart from the encoders, which only work if the left half is master (connected to the computer). I am now starting with the case design and will fix the encoders at some point (just software).
Software (QMK) is licensed under GPL 2.0, With PCB and case designs you are free to do as you will.
Yes and No. I will not open shop and sell the keyboard, but the resources are free and open, so you can order all the parts yourself.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +14 |
| 29 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_1u | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +13 |
| 9 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C6, C7, C10, C11, C13 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R10 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric | C12, C14 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R6 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06_MountingPin | Connector_JST:JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | J3 |
| 1 | Rotary_Encoder_Default | Rotary_Encoder:RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-Sxxxx | SW2 |
| 1 | STM32F401RCTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U1 |
| 1 | ~ | lib-zegonix:SK6812MINI-E_3.2x2.8_reverse_mount | D31 |

zegonix/qua-ken
design resources for the staggered column split keyboard qua-ken


carrefinho/forager
34-key wireless split keyboard inspired by ZSA Voyager

PantsForBirds/adsbee
Open Source Embedded ADS-B Receiver



siderakb/ergo-snm-keyboard
ErgoSNM is a split ergonomic keyboard integrated with trackball, wireless is in beta

zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

It measures 143.7 × 114.3 mm and has 2 copper layers, 1.6 mm thick.
90 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the zegonix/qua-ken repository on GitHub, at the commit this page was made from: the board is pcb-right/pcb-right.kicad_pcb and its schematic daughter-board-left/daughter-board-left.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).