
25Zak001 ESP32 Mark0
zdenekru/ESP32-Mark0
First trial to utilize ESP32-Wroom-32E NodeMCU with BME280 and eInk display. Made with KiCAD 9.0

First trial to utilize ESP32-Wroom-32E NodeMCU with BME280 and eInk display. Made with KiCAD 9.0
25Zak001 ESP32 Mark0 Rev1 is an open-source printed circuit board by zdenekru, from the zdenekru/ESP32-Mark0 repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 12 parts on 31 nets, routed with 62 tracks and 0 vias.
It is built around the DHT11. Its parts include 6 connectors and 1 IC. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
ESP32 Mark0 is a powerful and not-so-compact IoT development project based on the ESP32-WROOM-32 microcontroller. This project showcases both hardware and firmware design, with a focus on wireless communication, embedded control, and a simple web dashboard interface.
ESP32 Mark0 is designed to:
Developed step-by-step with the help of OpenAI's ChatGPT — from schematic to code.
ESP32-Mark0/
├── 25Zak001 ESP32 Mark0-backups/ # Backup versions and old files
├── CodeESP32/ESP32_Mark0_Github_ready/ # Arduino firmware
├── CodePython/ # Python scripts and dashboard HTML
├── Manufacturing Files Rev0/ # Rev0 Gerbers and fab files
├── Manufacturing Files Rev1/ # Final Rev1 files for production
├── .kicad_ # KiCad project files (Rev0 and Rev1)
├── .gitignore
├── .gitattributes
├── README.md
├── fp-info-cache
├── qrCode.kicad_sym
└── 25Zak001 ESP32 Mark0.step # 3D model of the boardUpload the sketch via Arduino IDE after selecting the correct board and port:
The web dashboard (in CodePython/) includes a lightweight HTML interface that interacts with the ESP32 over Wi-Fi. Customize this dashboard for sensor readouts, toggles, or control logic.
Both Rev0 and Rev1 were designed in KiCad and manufactured via JLCPCB. All Gerber, BOM, and position files are provided in the respective manufacturing folders.
This project was co-developed with ChatGPT, assisting in:
MIT License – see LICENSE file.
Made with ☕, perseverance, and ChatGPT.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad_TopBottom | H1, H2, H3, H4 |
| 1 | DHT11 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | U1 |
| 1 | ESP32 Left Side | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J6 |
| 1 | ESP32 Right Side | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J7 |
| 1 | Free GPIOs from Left Side | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | Free GPIOs from Right Side | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J4 |
| 1 | LOGO | LOGO | G*** |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J1 |
| 1 | eInk display SPI | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J2 |

zdenekru/ESP32-Mark0
First trial to utilize ESP32-Wroom-32E NodeMCU with BME280 and eInk display. Made with KiCAD 9.0


lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi


ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project

GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro

bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.

Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.

unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
12 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the zdenekru/ESP32-Mark0 repository on GitHub, at the commit this page was made from: the board is 25Zak001 ESP32 Mark0 Rev1.kicad_pcb and its schematic 25Zak001 ESP32 Mark0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).