6 layers50.8 × 50.8 mm
4 layers50 × 50 mm
GD32 SPINE
zbwu/GD32_SPINE2- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.59 mm
- Parts
- 38
- Nets
- 57
- Pads
- 183
- Tracks, vias
- 401, 180
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 23 Oct 2021
- Updated
- 30 Nov 2021
Overview
GD32 SPINE is an open-source printed circuit board by zbwu, from the zbwu/GD32_SPINE repository on GitHub, published under the MIT licence. It is a 4-layer board of 50 × 50 mm with 38 parts on 57 nets, routed with 401 tracks and 180 vias.
It is built around the SN65HVD234D and AMS1117-3.3. Its parts include 14 connectors, 9 capacitors, 9 resistors, 4 ICs and 2 crystals.
Main components
2
SN65HVD234D
SOIC-8-40℃~+125℃ 1 1Mbps 3V~3.6V 50nA 6mA CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdGD32_SPINE
使用GD32C103的SPIne板，和CyberDog上面的SPIne板实现兼容
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R1, R3, R4, R5, R6, R7, R8 |
| 4 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7, J11, J12, J14 |
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C8, C9 |
| 2 | 0ohm | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R2, R9 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C7 |
| 2 | 5.1pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 6.8pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4, J5 |
| 2 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J9, J10 |
| 2 | SN65HVD234 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 1 | 24MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 32.768KHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J6 |
| 1 | Conn_01x14 | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J8 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J13 |
| 1 | GD32C103Cx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
Similar boards
- 2 layers67.3 × 85.7 mm
- 4 layers254.9 × 150.1 mm
- 4 layers96 × 42.2 mm
CANDrive
Andreasdahlberg/CANDrive
CANDrive is a brushed DC Motor Controller controlled via a CAN interface.
80 parts3GPL-3.0 - 4 layers373.1 × 220.9 mm
- 4 layers96 × 42.2 mm
Candrive
Andreasdahlberg/CANDriveHW
CANDrive is a brushed DC Motor Controller controlled via a CAN interface.
70 partsCC0-1.0 - 2 layers58 × 46 mm
Yy CAN board
SuzieLinux/kicad_projects
This repository has misc kicad projects If you feel that it is worth something for you you can go to my website and make a donation using the donate button which brings you to paypal https://suzielinux.com/
15 partsGPL-3.0 - 2 layers290.1 × 130 mm
Questions
How big is the GD32 SPINE PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.59 mm thick.
What parts does the GD32 SPINE use?
38 parts, built around the SN65HVD234D and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GD32 SPINE KiCad files?
From the zbwu/GD32_SPINE repository on GitHub, at the commit this page was made from: the board is GD32_SPINE.kicad_pcb and its schematic GD32_SPINE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GD32 SPINE design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).