4 layers106 × 80 mm
Mainboard
PyroVision-ThermalCam/Mainboard
Mainboard for the PyroVision thermal camera.
152 parts11GPL-3.0
4 layers40 × 12 mm
Usb adapter
zbwu/cyberdog_misc15Demultiplexing "Download" Type-C port to Console, Recovery USB and Recovery Button
- Size
- 40 × 12 mm
- Copper layers
- 4
- Thickness
- 1.59 mm
- Parts
- 20
- Nets
- 24
- Pads
- 82
- Tracks, vias
- 128, 81
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 9 Nov 2021
- Updated
- 17 Apr 2022
Overview
Usb adapter is an open-source printed circuit board by zbwu, from the zbwu/cyberdog_misc repository on GitHub, published under the MIT licence. It is a 4-layer board of 40 × 12 mm with 20 parts on 24 nets, routed with 128 tracks and 81 vias.
It is built around the TXB0102DCU. Its parts include 6 capacitors, 3 ICs, 3 connectors, 2 resistors and 1 switch. It belongs with the interfaces and adapters boards of this library.
Main components
1README
usb_adapter/README.mdCyberdog USB Adapter
Demultiplexing "Download" Type-C port to Console, Recovery USB and Recovery Button
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C4, C6 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3 |
| 2 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C5 |
| 2 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23 | U1, U2 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 20K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | Conn_01x05 | Library:Harwin_M20-89005xx_1x05_P2.54mm_Horizontal | J1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP3 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | TXB0102DCU | Package_SO:VSSOP-8_2.4x2.1mm_P0.5mm | U3 |
| 1 | USB_B_Micro | Library:USB_Micro-B_YourCee_7.2_16Pin | J2 |
| 1 | USB_C_Plug | Library:TYPE-C-31-G-08 | P1 |
Similar boards
- 4 layers72.8 × 82.1 mm
Halberd v2
RemkoPr/airo-halberd
The Halberd coupling (paper), named after its characteristic PCB shape, is a replacement of the Robotiq I/O Coupling enhanced with a Nina B301 microcontroller, developed at IDLab-AIRO, Ghent University (Belgium), imec.
77 parts4 - 2 layers53.5 × 33 mm
Acw02 zb v1.1
Fabiancrg/acw02_zb
See the documentation files for advanced features, troubleshooting, and hardware details.
30 parts3 - 4 layers100 × 100 mm
LED Panel Controller
drewsum/LED_Panel_Controller
Controls a single 64x64 HUB75E LED Panel
590 parts2GPL-3.0 - 2 layers
Hivemind
agenticaiuw/hivemind
Unified monorepo for the Agentic Gadget hardware, firmware, local agent, cloud relay, and Bluetooth audio bridge.
29 parts1 - 4 layers204 × 150 mm
Gateway
Kampi/IoT-Gateway
Open-Source Zigbee, Thread, wM-Bus, LoRa, LoRaWAN gateway for Home Assistant.
319 parts1 - 4 layers149.9 × 74.2 mm
BCD-0o27
petnica-rac-seminari/BCD-0o27-Tetris
The BalcCon Cyberdeck 0o27 (BCD-0o27) comes with a development framework that makes it easier to add functionality to the cyberdeck.
142 parts1 - 4 layers243.8 × 170.2 mm
Questions
How big is the Usb adapter PCB?
It measures 40 × 12 mm and has 4 copper layers, 1.59 mm thick.
What parts does the Usb adapter use?
20 parts, built around the TXB0102DCU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usb adapter KiCad files?
From the zbwu/cyberdog_misc repository on GitHub, at the commit this page was made from: the board is usb_adapter/usb_adapter.kicad_pcb and its schematic usb_adapter/usb_adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usb adapter design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).