Skip to the content
2 layers37 × 61.2 mmCANtina, the printed circuit board in 3D

A CAN bus Star PCB by Team 6502

Size
37 × 61.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
4
Pads
52
Tracks, vias
123, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
4 Oct 2019
Updated
9 Feb 2020

Overview

CANtina is an open-source printed circuit board by zbrown23, from the zbrown23/CANtina repository on GitHub. It is a 2-layer board of 37 × 61.2 mm with 14 parts on 4 nets, routed with 123 tracks and 0 vias.

Its parts include 10 connectors and 2 resistors. It belongs with the interfaces and adapters and retro computing and games boards of this library.

README

README.md

CANtina

CANtina

CANtina is a CAN bus star PCB inspired by Team 5883's PCBs and developed by 6502 DARC SIDE's Electrical Subteam.

  • CANtina utilizes Weidmuller LSF-SMT-3.5 push-to-connect terminal blocks to allow you to easily connect and disconnect devices.
  • CANtina has built in resistors in order to allow you to maintain CANbus's required impedance.
  • CANtina is Open Source!

Warning:

Star topology can be very fussy. It violates the ISO 11898 standard and is not officially supported by any manufacturer. Team 6502 does not reccomend star topology for any applications that are not for the purposes of education, research, or hardware and software development. Please be careful!

Questions or Comments

If you have any questions or comments, please feel free to drop me a line on Chief Delphi @21brownz.

Parts

14
QtyValueFootprintReferences
10Screw_Terminal_01x02Weidmuller:LSF-SMT-3.5-2J1, J2, J3, J4, J5, J6, J7, J8, J9, J10
2120usagi1975/kicad_mod.pretty:Resistors_Vertical_10mmR1, R2
2SolderJumper_2_Opencpavlina/kicad-pcblib/conn-test.pretty:JUMPER-SOLDER-3mmJP1, JP2

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the CANtina PCB?

It measures 37 × 61.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CANtina use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CANtina KiCad files?

From the zbrown23/CANtina repository on GitHub, at the commit this page was made from: the board is CANtina.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the CANtina design in my own project?

Its repository states no licence, so its author keeps all rights: ask zbrown23 before reusing the design.