2 layers81.9 × 85.9 mm
Heating controller
BwanaFr/heating-controller
The heater can be controlled using MQTT using a Wi-Fi connection or using the integrated OLED display. It is designed to be mounted on a DIN rail in an electrical cabinet.
36 parts
2 layers72 × 52 mm
GarageNotifier
zbockaj/GarageNotifier-PCBHelium-network device for reporting open/closed status of (garage) door.
- Size
- 72 × 52 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 72
- Pads
- 220
- Tracks, vias
- 538, 189
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 15 Aug 2022
- Updated
- 15 Aug 2022
Overview
GarageNotifier is an open-source printed circuit board by zbockaj, from the zbockaj/GarageNotifier-PCB repository on GitHub. It is a 2-layer board of 72 × 52 mm with 78 parts on 72 nets, routed with 538 tracks and 189 vias.
It is built around the MDBT42Q-512KV2, LIS3DH and RFM95W-868S2, with the SM351LT, 0467.500NRHF and LQM18FN100M00D among its other parts. Its parts include 21 resistors, 15 capacitors, 4 ICs, 3 diodes and 3 connectors. It belongs with the nRF52 and nRF5x and NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
12
MDBT42Q-512KV2
QFN-41加密功能、Mesh组网 QFN-41 Bluetooth Modules ROHSRAYTACBluetooth Modules
LIS3DH
LGA-16(3x3)-40℃~+85℃ 1.71V~3.6V 16bit 500nA Accelerometer Motion event detection SPI、I2C X,Y,Z ±16g LGA-16(3x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
RFM95W-868S2
16-SMD16-SMD New Arrivals ROHSHopeRF Micro-electronicsUncategorised
SM351LT
SOT-23-40℃~+85℃ 1.65V~5.5V 360nA 5Gs 7Gs Omnipolar Push-pull SOT-23 Hall Switches ROHSHoneywellHall Switches
0467.500NRHF
0603-55℃~+90℃ 0.0087 0.8mm 1.6mm 32V 32V 500mA 50A Surface Mount Fuse 0603 Disposable fuses ROHSLittelfuseDisposable FusesLQM18FN100M00D
06031.17Ω 10uH 30MHz 50mA 50mA ±20% 0603 Inductors (SMD) ROHSMurataInductors (SMD)
LQG15HS15NJ02D
040215nH 2.5GHz 320mΩ 450mA 8@100MHz ±5% 0402 Inductors (SMD) ROHSMurataInductors (SMD)
1N4148WT
SOD-523-55℃~+150℃ 1.25V@150mA 100V 150mA 150mW 1uA@75V 2A 4ns Independent SOD-523 Switching Diodes ROHShongjiachengSwitching Diodes
LQW18AN20NG00D
0603160mΩ 20nH 550mA Consumer grade Unshielded Inductor ±2% 0603 Inductors (SMD) ROHSMurataOld Batch
APBD3224ESGC-F01
SMD,3.2x2.4mm-40℃~+85℃ 20mA 20° 2V、2.2V 40mcd、55mcd 565nm、627nm 568nm、617nm 62.5mW、75mW Discrete Diode Red, Emerald Green Water Clear SMD,3.2x2.4mm LED Indication - Discrete ROHSKingbrightLED Indication - Discrete
ESD7371HT1G
SOD-323ESD And Surge Protection (TVS/ESD)TECH PUBLIC
FTSH-105-01-F-DV-K
SMD,P=1.27mm-55℃~+125℃ 1.27mm 10P 2 2x5P 3.05mm 3.4A Black Gold Phosphor bronze Pin Header Surface Mount,Vertical SMD,P=1.27mm Pin Headers ROHSSamtecPin Headers
README
README.mdGarageNotifier-PCB
Helium-network device for reporting open/closed status of (garage) door.
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12 |
| 6 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3, FID4, FID5, FID6 |
| 5 | 0R | Resistor_SMD:R_0603_1608Metric | R1, R2, R4, R15, R16 |
| 5 | 220R | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R13, R14 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C6, C8, C14 |
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric | C12, C13, C15 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R7, R17, R18 |
| 3 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C9 |
| 3 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_ISO7380 | H1, H2, H3 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C3, C7 |
| 2 | NF-0R | Resistor_SMD:R_0603_1608Metric | R3, R8 |
| 2 | NF-100k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 1 | 0.5A | Resistor_SMD:R_0603_1608Metric | F1 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | 15nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 1N4148WT | Diode_SMD:D_SOD-523 | D2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 20nH | Inductor_SMD:L_0603_1608Metric | L3 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 6.8pF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | APBD3224ESGC | ZB_Opto:LED_Kingbright_APBD3224 | D3 |
| 1 | CR123 Holder | ZB_Mechanical:Keystone_1051 | XBT1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | ESD7371HT1G | ZB_Discrete:SOD-323 | D1 |
| 1 | FTSH-105-01-F-DV-K | digikey-footprints:PinHeader_2x5_P1.27_SMD | J2 |
| 1 | LIS3DH | ZB_IC:ST_LGA-16_3x3mm | U4 |
| 1 | MDBT42Q-512KV2 | ZB_IC:MDBT42Q-512KV2 | U1 |
| 1 | NF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | NF-10k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | NF-1k | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | NF-2M | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | NF-ER18505 | ZB_Mechanical:ER18505 | BT1 |
| 1 | NF-Reed NO | ZB_Sensors:MK15-B-2_Reed | SW2 |
| 1 | NF-U.FL | digikey-footprints:Coax_Conn_U.FL | J1 |
| 1 | PTS647SK50SMTR2LFS | ZB_Mechanical:PTS647SK50SMTR2LFS | SW1 |
| 1 | RFM95W-868S2 | RF_Module:HOPERF_RFM9XW_SMD | U2 |
| 1 | SM351LT | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | W3139 | ZB_Passives:W3139 | ANT1 |
The 77 most common of 78 parts.
Similar boards
- 2 layers40 × 80 mm
Legofruitv2
lulf/legobots
Repository with various firmware and software for lego-related projects:
47 parts - 6 layers100 × 53.8 mm
- 4 layers58 × 45 mm
Microduck CM4 Carrier R13
ldcyes/OpenDuck
已完成可编辑原理图、真实四层 PCB 和本地库。阶梯板面积 4510 mm²，比原 65×60 + 32×30 mm 两板总面积 4860 mm² 少 350 mm²（7.20%）。原 TDK 模块本体、四个安装孔和原 TDK 器件位置保留，回生电容采用原料号卧装，J1 因实际拔插通道冲突改为同系列 BM08 顶插。当前为工程候选，未制造，未完成热、回生瞬态、低电量或行走验收。
46 parts - 4 layers83 × 109 mm
- 4 layers60 × 120 mm
Theoros
Majorwhiskey/gps-lora
Theoros is a USB-C GPS logger and LoRa tracker built on the ESP32-S3. It logs 1 Hz u-blox M10 fixes to microSD, shows status on an OLED and sends AES-128-CCM encrypted position over 868 MHz LoRa.
88 partsCERN-OHL-P-2.0 - 4 layers32 × 45 mm
- 2 layers60 × 45 mm
Questions
How big is the GarageNotifier PCB?
It measures 72 × 52 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GarageNotifier use?
78 parts, built around the MDBT42Q-512KV2, LIS3DH, RFM95W-868S2 and SM351LT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GarageNotifier KiCad files?
From the zbockaj/GarageNotifier-PCB repository on GitHub, at the commit this page was made from: the board is GarageNotifier.kicad_pcb and its schematic GarageNotifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GarageNotifier design in my own project?
Its repository states no licence, so its author keeps all rights: ask zbockaj before reusing the design.