
Desktop 50 Pin TopConn
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

Interfaces an HEDS-5000 series encoder to a HEDS-9000 interface
Zaza g69-encoder regen smd is an open-source printed circuit board by zaza-the-robot, from the zaza-the-robot/g-69-encoder-interface repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 44.5 × 29.5 mm with 11 parts on 12 nets, routed with 105 tracks and 12 vias.
It is built around the 74HC14. Its parts include 4 diodes, 2 connectors, 1 capacitor, 1 IC and 1 fuse.
Interfaces an HEDS-5000 series encoder to a HEDS-9000 interface
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | TVS | Diodes_SMD:D_SOD-323 | D1, D2, D3, D4 |
| 1 | 10u | Capacitors_Tantalum_SMD:CP_Tantalum_Case-X_EIA-7343-43_Reflow | C1 |
| 1 | 50mA | Resistors_SMD:R_1206 | F1 |
| 1 | 74HC14 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U1 |
| 1 | IDC-10 | Pin_Headers:Pin_Header_Angled_2x05_Pitch2.54mm | J1 |
| 1 | KK 2.54 | Connectors_Molex:Molex_KK-6410-05_05x2.54mm_Straight | J2 |
The 9 most common of 11 parts.

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

keirf/pcb-projects
The old Kickstart switcher documentation is here.

anyshake/explorer
🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.

nicolacimmino/PLC-14500
Retro trainer board based on the MC14500 1-bit ICU. The project is OSHW certified and a ready to assemble kit is available on Tindie.


transistorfet/computie
A collection of 68k computer projects, including a unix-like operating system written in C that runs on them

sbstnh/programmable_precision_resistor
A SCPI programmable precision resistor

It measures 44.5 × 29.5 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the 74HC14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the zaza-the-robot/g-69-encoder-interface repository on GitHub, at the commit this page was made from: the board is zaza-g69-encoder-regen-smd.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).