Skip to the content
2 layers29.7 × 47.4 mmStamp, the printed circuit board in 3D

First glance at microcontroler PCBs project

Size
29.7 × 47.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
47
Pads
158
Tracks, vias
333, 37
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
24 Jun 2022
Updated
24 Jun 2022

Overview

Stamp is an open-source printed circuit board by Zachorowski, from the Zachorowski/Rectification-column-driver-with-remote-communication repository on GitHub. It is a 2-layer board of 29.7 × 47.4 mm with 33 parts on 47 nets, routed with 333 tracks and 37 vias.

Its parts include 17 capacitors, 4 resistors, 4 connectors, 3 inductors and 2 switches. It belongs with the ESP32 boards of this library.

Parts

33
QtyValueFootprintReferences
5100pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC8, C9, C10, C15, C16
210nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC13, C17
210uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C3
21uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC5, C12
222pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2, C6
22nHInductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolderL2, L3
2Conn_01x15_MaleConnector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_VerticalJ3, J4
2SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW1, SW2
10Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC7
11.5kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4
110kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
11ufCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC11
120kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2
1270pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC4
13.3nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC14
1390nHInductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolderL1
1499Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3
1ASE-xxxMHzOscillator:Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm_HandSolderingX1
1Conn_01x04_MaleConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1Conn_CoaxialConnector_Coaxial:U.FL_Molex_MCRF_73412-0110_VerticalJ1
1ESP32Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mmU1
1LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    33 parts1kGPL-3.0
  • 2 layers127 × 96 mmAmiga gfxcard, the printed circuit board in 3D

    Amiga gfxcard

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    33 parts1k
  • 2 layers92.7 × 58.4 mmHacky holidays, the printed circuit board in 3D

    Hacky holidays

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    33 parts915
  • 2 layers240 × 120 mmQuiver PDB 01, the printed circuit board in 3D

    Quiver PDB 01

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    33 parts617CERN-OHL-S-2.0
  • 2 layers75 × 26 mmDIY detector, the printed circuit board in 3D

    DIY detector

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    33 parts558BSD-2-Clause
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    33 parts447MIT
  • 2 layers65 × 30 mmCanHat, the printed circuit board in 3D

    CanHat

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    33 parts373GPL-3.0

Questions

How big is the Stamp PCB?

It measures 29.7 × 47.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Stamp use?

33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Stamp KiCad files?

From the Zachorowski/Rectification-column-driver-with-remote-communication repository on GitHub, at the commit this page was made from: the board is PCB/stamp/trunk/Stamp.kicad_pcb and its schematic PCB/mainboard/tags/v1/trunk.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Stamp design in my own project?

Its repository states no licence, so its author keeps all rights: ask Zachorowski before reusing the design.