
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A custom PCB designed in KiCad 8 that detects nearby objects using an IR LED and photodiode pair, processed through an LM741 op-amp comparator circuit with adjustable sensitivity via a potentiometer.
IR sensor is an open-source printed circuit board by yychia131, from the yychia131/irsensorpcb repository on GitHub. It is a 2-layer board with 11 parts on 11 nets, routed with 72 tracks and 7 vias.
Its parts include 4 resistors, 4 diodes, 1 IC and 1 connector. It belongs with the sensors and measurement boards of this library.
A custom PCB designed in KiCad 8 that detects nearby objects using an IR LED and photodiode pair, processed through an LM741 op-amp comparator circuit with adjustable sensitivity via a potentiometer.
| Reference | Component | Description |
|---|---|---|
| U1 | LM741 | Op-amp configured as comparator |
| D1 | D_Photo | Photodiode — IR receiver |
| D2 | IR_LED | Infrared emitter LED |
| D3 | OUT_LED | Output indicator LED |
| D4 | PWR_LED | Power indicator LED |
| RV1 | 10k_POT | Potentiometer — sensitivity adjustment |
| R1–R4 | 330Ω | Current limiting resistors |
| J1 | Conn_01x03 | 3-pin output connector |



| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 10k_POT | Potentiometer_THT:Potentiometer_ACP_CA9-V10_Vertical_Hole | RV1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Horizontal | J1 |
| 1 | D_Photo | LED_THT:LED_D4.0mm | D1 |
| 1 | IR_LED | LED_THT:LED_D4.0mm | D2 |
| 1 | LM741 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U1 |
| 1 | OUT_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | PWR_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the yychia131/irsensorpcb repository on GitHub, at the commit this page was made from: the board is IR sensor.kicad_pcb and its schematic IR sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask yychia131 before reusing the design.