2 layers304.8 × 95.3 mm
2 layers
Ssl midi controller
yves-obreykov/reason_ssl_midi_controller1Midi-controller used for controlling the ssl mixer in Reason DAW
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 94
- Pads
- 426
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 31 May 2025
- Updated
- 31 May 2025
Overview
Ssl midi controller is an open-source printed circuit board by yves-obreykov, from the yves-obreykov/reason_ssl_midi_controller repository on GitHub, published under the MIT licence. It is a 2-layer board with 61 parts on 94 nets.
It is built around the CD74HC4067M and WS2812B-MINI-X2. Its parts include 28 switches, 11 capacitors, 11 diodes, 4 ICs and 1 connector. It belongs with the audio and music boards and the RP2040 boards of this library.
Main components
2
CD74HC4067M
SOIC-24-300mil-55℃~+125℃ 16 160Ω 16:1 22ns 2V~6V 345ns 365ns 89MHz Bidirectional analog channel、Glitch-free switching SOIC-24-300mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
WS2812B-MINI-X2
SMD3535-4P0.6mA 0.95mm 2kHz 3.5V~5.3V 3.5mm 3.5mm 800Kbit/s B:215mcd、R:330mcd、G:700mcd R:620nm~625nm、B:467nm~472nm、G:515nm~520nm 内置上电复位电路、内置掉电复位电路、集成智能反向连接保护功能 SMD3535-4P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
README
README.mdReason SSL midi-controller
This project aims to design a custom Midi controller for controlling the SSL-mixer (EQ and Compressor) in Reason DAW
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_MountingHoles | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15 |
| 13 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25, SW26, SW27, SW28 |
| 11 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C89, C90, C91, C92, C93, C94, C95, C96, C97, C98, C99 |
| 11 | WS2812B-mini | LED_SMD:LED_WS2812B-Mini_PLCC4_3.5x3.5mm | D89, D90, D91, D92, D93, D94, D95, D96, D97, D98, D99 |
| 6 | 10K | Resistor_THT:R_Array_SIP9 | RN1, RN2, RN3, RN4, RN5, RN6 |
| 3 | CD74HC4067M | Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm | U2, U3, U4 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | Pico | Module:RaspberryPi_Pico_Common_THT | U1 |
Similar boards
- 4 layers144 × 127 mm
Frothfet
hoeken/frothfet
Yarrboard load controller board with current sense, volt sense, fuses, and sender support.
394 parts14GPL-3.0 - 2 layers220 × 300 mm
Transit
thebenedict/seattletransit-hardware
Schematic and PCB for a circuit board map of Seattle area public transit.
448 parts14CERN-OHL-W-2.0 - 2 layers85 × 53 mm
Cccamp23 nametag
HazeCore/Nametag_Hardware
This is the hardware for out Nametag Badge for Chaos Communication Camp 2023. You can find more information about the Project at https://hazeco.re/cccamp-nametag/.
34 parts3 - 4 layers160.7 × 51.7 mm
- 2 layers209.2 × 82 mm
- 2 layers46 × 46 mm
- 2 layers40 × 30 mm
NOVA S3
fubiniricci/NOVA-S3
A 40 × 30 mm, two-layer ESP32-S3 development board, designed and generated programmatically from the official KiCad libraries with a custom grid-based auto-router.
26 partsMIT
Questions
What parts does the Ssl midi controller use?
61 parts, built around the CD74HC4067M and WS2812B-MINI-X2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ssl midi controller KiCad files?
From the yves-obreykov/reason_ssl_midi_controller repository on GitHub, at the commit this page was made from: the board is Hardware/ssl_midi_controller/ssl_midi_controller.kicad_pcb and its schematic Hardware/ssl_midi_controller/buttos_and_leds.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ssl midi controller design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).