

AudioCombiner
PCB that connects your headphones and another output device to your phone.
- Size
- 27.9 × 27.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 10
- Pads
- 32
- Tracks, vias
- 50, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Dec 2019
- Updated
- 26 Dec 2019
Overview
AudioCombiner is an open-source printed circuit board by yvbbrjdr, from the yvbbrjdr/AudioCombiner repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 27.9 × 27.9 mm with 8 parts on 10 nets, routed with 50 tracks and 0 vias.
Its parts include 4 resistors and 3 connectors. It belongs with the audio and music boards of this library.
README
README.mdAudioCombiner
PCB that connects your headphones and another output device to your phone.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 1 | Headphones | Connector_Audio:Jack_3.5mm_PJ320E_Horizontal | J3 |
| 1 | Primary | Connector_Audio:Jack_3.5mm_PJ320E_Horizontal | J1 |
| 1 | Ratio | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV1 |
| 1 | Secondary | Connector_Audio:Jack_3.5mm_PJ320E_Horizontal | J2 |
Similar boards
- 2 layers20.5 × 24.8 mm

- 2 layers14.4 × 10.5 mm

OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm

Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm

USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm

7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm

PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm

PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0
Questions
How big is the AudioCombiner PCB?
It measures 27.9 × 27.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AudioCombiner use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AudioCombiner KiCad files?
From the yvbbrjdr/AudioCombiner repository on GitHub, at the commit this page was made from: the board is AudioCombiner.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AudioCombiner design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).