2 layers66 × 16 mm
2 layers66 × 96 mm
FireworksRobotSubx6
yutotnh/FireworksRobotSub- Size
- 66 × 96 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 8
- Pads
- 156
- Tracks, vias
- 216, 240
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Sep 2020
- Updated
- 17 Sep 2020
Overview
FireworksRobotSubx6 is an open-source printed circuit board by yutotnh, from the yutotnh/FireworksRobotSub repository on GitHub. It is a 2-layer board of 66 × 96 mm with 60 parts on 8 nets, routed with 216 tracks and 240 vias.
Its parts include 18 resistors, 18 ICs and 6 connectors.
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R2, R3, R3, R3, R3 +2 |
| 18 | LBR-127HLD | SamcSys_Parts:A5131A | U1, U1, U1, U1, U1, U1, U2, U2, U2, U2, U2, U2, U3, U3, U3, U3 +2 |
| 18 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H1, H1, H1, H1, H1, H2, H2, H2, H2, H2, H2, H3, H3, H3, H3 +2 |
| 6 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1, J1, J1, J1, J1, J1 |
More from yutotnh/FireworksRobotSub
1Similar boards
- 2 layers35 × 50 mm
- 2 layers32.9 × 119.1 mm
- 2 layers35.9 × 62.7 mm
Rp2040-memcard
sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.
60 parts241 - 2 layers58 × 110 mm
- 2 layers52 × 90 mm
- 2 layers42.5 × 80 mm
- 2 layers57.4 × 12 mm
- 2 layers87.9 × 123.9 mm
Bitdoglab
BitDogLab/BitDogLab
Open-source educational hardware for embedded systems, programming, electronics, and physical computing.
60 parts203
Questions
How big is the FireworksRobotSubx6 PCB?
It measures 66 × 96 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FireworksRobotSubx6 use?
60 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FireworksRobotSubx6 KiCad files?
From the yutotnh/FireworksRobotSub repository on GitHub, at the commit this page was made from: the board is FireworksRobotSubx6.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the FireworksRobotSubx6 design in my own project?
Its repository states no licence, so its author keeps all rights: ask yutotnh before reusing the design.