
Yamabiko a
airpocket-soundman/chikuwa-flute-robot
学習では、あらかじめ作った 1,000 曲のセット(runs/targetbank.npz、trainresiduales.py --bank 1000 で自動作成)から毎世代 8 曲を選んで使い回します。評価用の曲は別の乱数で作るので、学習用と重なりません。セットの中身は WAV と図で確認できます:

DragonRobot is an open-source printed circuit board by yutotnh, from the yutotnh/DragonRobot repository on GitHub, published under the MIT licence. It is a 2-layer board of 99.1 × 81.3 mm with 31 parts on 55 nets, routed with 147 tracks and 133 vias.
It is built around the RN4020-V/RM, TB6643KQ,8 and L7805. Its parts include 12 capacitors, 7 connectors, 6 ICs and 2 fuses.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1000u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C2, C3, C4, C5, C8 |
| 4 | 10u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C9, C10, C11, C12 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | Screw_Terminal_01x02 | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J4, J5, J6, J7 |
| 4 | TB6643KQ,8 | SamcSys_Parts:HSIP7-P-2.54A | IC2, IC3, IC4, IC5 |
| 2 | RN4020 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 1 | 0.1u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C7 |
| 1 | 0.33u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C6 |
| 1 | 47u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | Fuse | SamcSys_Parts:MF505 | F2 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | MBED-LPC1768 | SamcSys_Parts:DIPS2286W63P254L5370H300Q40N | IC1 |
| 1 | Polyfuse | Fuse:Fuse_Littelfuse_395Series | F1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |

airpocket-soundman/chikuwa-flute-robot
学習では、あらかじめ作った 1,000 曲のセット(runs/targetbank.npz、trainresiduales.py --bank 1000 で自動作成)から毎世代 8 曲を選んで使い回します。評価用の曲は別の乱数で作るので、学習用と重なりません。セットの中身は WAV と図で確認できます:


Ruchi12377/AutoEraser
選択範囲を左上を基準とし01で表す。真ん中から右下まで選択した場合、Start = (0.5, 0.5) End = (1, 1)となる。


LeHack/SPSP
Particulate matter pollution monitoring system (:poland: System Pomiaru Stężenia Pyłu w powietrzu)


takjn/GRRNble
DIY Smartwatch using Renesas RL78/G13 MCU and RN4020 ble module with Android companion app.

Nicowars/poncho-bluetooth
Repositorio para el desarrollo de un Poncho que implementa Bluetooth para la EDU-CIAA
It measures 99.1 × 81.3 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the RN4020-V/RM, TB6643KQ,8 and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the yutotnh/DragonRobot repository on GitHub, at the commit this page was made from: the board is DragonRobot.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).