YuseiIto/eightbots8bots is an open-source printed circuit board by YuseiIto, from the YuseiIto/eightbots repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99 × 74 mm with 41 parts on 66 nets, routed with 359 tracks and 20 vias.
It is built around the CH340E and ESP32-WROOM-32. Its parts include 10 capacitors, 8 resistors, 5 ICs, 5 connectors and 4 diodes. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C1, C2, C3, C6, C7, C8, C9 |
| 5 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R3, R4, R9, R10, R11 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R6, R7, R8 |
| 2 | LED | LED_THT:LED_D3.0mm | D2, D3 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C10 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | 22uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C5 |
| 1 | 9V IN | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | AZ1084-3.3 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | CH340E | Package_DIP:DIP-10_W7.62mm_LongPads | U4 |
| 1 | D | Diode_THT:D_A-405_P10.16mm_Horizontal | D4 |
| 1 | DRV8833 Module | DRV8833_Module:DRV8833_Module | U5 |
| 1 | ESP32-WROOM-32 | ESP32:ESP-32SBoard | U1 |
| 1 | GY-521 | GY-521:GY-521_Part_side_up | U3 |
| 1 | LED_RABG | LED_THT:LED_D5.0mm-4_RGB | D1 |
| 1 | Motor BAT | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | Motor L | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | Motor R | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | SW1 |
| 1 | SSD1306 | SSD1306:128x64OLED | Brd1 |
| 1 | SW_SPDT | AKI_Toggle_SW:SPDT_With_Mounting_Hole | SW3 |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW4 |
| 1 | USB_B_Micro | microUSB-board:MicroUSBBoard | J2 |
The 37 most common of 41 parts.
It measures 99 × 74 mm and has 2 copper layers, 1.6 mm thick.
41 parts, built around the CH340E and ESP32-WROOM-32. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the YuseiIto/eightbots repository on GitHub, at the commit this page was made from: the board is board/electronics/8bots.kicad_pcb and its schematic board/electronics/8bots.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Habib-creater/esp32-wroom-32-usb-development-board
Professional ESP32-WROOM-32 development board with USB-UART programming, 3.3V regulation, BOOT/RESET control, GPIO expansion, I2C ESD protection, and complete KiCad manufacturing documentation.
Gamu2124/RoboCupJunior2026-RobotDatas
Complete data for the robot that won the Japan and World championships / 日本大会優勝 & 世界大会優勝したロボットの全データ
Open-Smartwatch/open-smartwatch-gps
Hardware design files for the GPS version of the open-smartwatch
teapotlaboratories/feather-rak3172
Teapotlabs Feather RAK3172: Low-cost Low-power LoRaWAN Development Board
azerimaker/Penguino-STM32WL-LoRa-E5
This repo contains all the necessary design and fabrication files for the Seeed Studio LoRa-E5 based Penguino Feather breakout board.
