

MotorController
- Size
- 70 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 42
- Pads
- 142
- Tracks, vias
- 310, 53
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Nov 2025
- Updated
- 31 Jan 2026
Overview
MotorController is an open-source printed circuit board by yumo13, from the yumo13/G25_PCB repository on GitHub. It is a 2-layer board of 70 × 40 mm with 40 parts on 42 nets, routed with 310 tracks and 53 vias.
It is built around the MIC5504-3.3YM5, CSTNE16M0VH3C000R0 and LTST-C19HE1WT. Its parts include 10 resistors, 9 capacitors, 7 connectors, 5 diodes and 3 ICs. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
3MIC5504-3.3YM5
SOT-23-5-40℃~+125℃@(Tj) 1 120uVrms 15uA 180mV@(300mA) 3.3V 300mA 5.5V 75dB@(1kHz) Fixed Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCSTNE16M0VH3C000R0
SMD3213-3P-40℃~+125℃ 15pF 16MHz 40Ω SMD3213-3P Ceramic Resonators ROHSMurataCeramic ResonatorsLTST-C19HE1WT
1.6x1.6mm-20℃~+80℃ 0.35mm 1.6mm 1.6mm 1.8V~2.4V 112mcd~450mcd 130° 2.8V~3.9V 2.8V~3.9V 20mA 20mA 20mA 28mcd~180mcd 45mcd~180mcd 468nm 470nm 520nm 525nm 624nm 632nm 75mW 80mW 80mW Common Anode White Lens SMD-4P,1.6x1.6mm RGB LEDs ROHSLite-OnLight Emitting Diodes (LED)
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R6, R8, R9, R10 |
| 5 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5 |
| 4 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C8, C9 |
| 4 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R7 |
| 2 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J6, J7 |
| 1 | ATA6561 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | CSTNE16M0VH3C000R0 | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering | Y1 |
| 1 | Conn_01x02 | Connector_JST:JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J1 |
| 1 | Conn_01x06 | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J3 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J2 |
| 1 | ENC_1 | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J4 |
| 1 | ENC_2 | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J5 |
| 1 | LTST-C19HE1WT | LED_SMD:LED_LiteOn_LTST-C19HE1WT | D5 |
| 1 | MIC5504-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | STM32F303K8Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3305A | SW1 |
More from yumo13/G25_PCB
2- 4 layers100 × 80 mm

- 2 layers65 × 56 mm

Similar boards
- 4 layers37 × 17.6 mm

Keyvilboard2.0
RedBulletTooling/crypsis-public
This contains, all files from hardware to software production and all to make Crypsis
33 parts6Apache-2.0 - 4 layers40 × 14 mm

Rs probe
probe-rs/rusty-probe
This is an open hardware probe for the Serial Wire Debug (SWD) and JTAG protocol. Based on the RP2040 MCU.
108 parts170 - 4 layers40 × 14 mm

Hs probe
probe-rs/hs-probe
This is an open hardware probe for the Serial Wire Debug (SWD) and JTAG protocol. It utilizes an STM32F723 MCU which has an USB 2.0 High-speed Phy.
57 parts145 - 4 layers120 × 120 mm

Yellow
NabuCasa/yellow
Home Assistant Yellow - hardware for Home Assistant which grows with your needs.
322 parts116 - 4 layers20 × 74.3 mm

- 6 layers50 × 85 mm

- 2 layers25.7 × 27.7 mm

- 4 layers85 × 50 mm

Questions
How big is the MotorController PCB?
It measures 70 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MotorController use?
40 parts, built around the MIC5504-3.3YM5, CSTNE16M0VH3C000R0 and LTST-C19HE1WT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MotorController KiCad files?
From the yumo13/G25_PCB repository on GitHub, at the commit this page was made from: the board is MotorController/MotorController.kicad_pcb and its schematic MotorController/CAN.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MotorController design in my own project?
Its repository states no licence, so its author keeps all rights: ask yumo13 before reusing the design.