2 layers95 × 78 mm
2 layers95 × 78 mm
RP2040CommandStation
ytsurui/RP2040CommandStation2- Size
- 95 × 78 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 95
- Pads
- 424
- Tracks, vias
- 1,810, 232
- Pours
- 166
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 30 Jan 2023
- Updated
- 21 Sep 2026
Overview
RP2040CommandStation is an open-source printed circuit board by ytsurui, from the ytsurui/RP2040CommandStation repository on GitHub, published under the MIT licence. It is a 2-layer board of 95 × 78 mm with 96 parts on 95 nets, routed with 1,810 tracks and 232 vias.
It is built around the RP2040, M78AR033-1 and IRS2003PBF, with the W25Q16JVSNIQ, 1N4148W and TK25S06N1L,LQ among its other parts. Its parts include 25 resistors, 23 capacitors, 13 diodes, 8 connectors and 7 ICs. It belongs with the RP2040 boards of this library.
Main components
7
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)M78AR033-1
SIP,11.6x7.5mm-40℃~+85℃ 1 10.2mm 11.6mm 1A 2200uF 3.3V 300uA 50mVp-p 6V~36V 7.5mm 80%、90% 850kHz Plastic encapsulated type Short Circuit Protection、Automatic fault recovery Step-down type ±1% SIP,11.6x7.5mm DC-DC Power Modules ROHSYLPTECDC-DC Power Modules
IRS2003PBF
PDIP-8-40℃~+150℃ 10V~20V 150uA 2 290mA 35ns 600mA 70ns Half-Bridge IGBT、MOSFET Interleaved conduction protection、Dead-time control PDIP-8 Gate Drivers ROHSInfineon TechnologiesGate Drive ICs
W25Q16JVSNIQ
SOIC-8-40℃~+85℃ 100,000 cycles 10uA 120ms@(32KB) 133MHz 16Mbit 2.7V~3.6V 20 Years 400us SPI SOIC-8 NOR FLASH ROHSWinbond ElecNOR FLASH
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
TK25S06N1L,LQ
DPAKDPAK MOSFETs ROHSToshibaMOSFETs
SBRT20M60SP5
PowerDI-5-55℃~+150℃ 20A 320A 40uA@60V 520mV@20A 60V PowerDI-5 Super Barrier Rectifiers (SBR) ROHSDiodes IncorporatedSuper Barrier Rectifiers (SBR)
README
README.mdRP2040-Based DCC Command Station
underconstruction
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 104 | footprint:C_1005 | C2, C5, C8, C9, C12, C13, C14, C15, C16, C17, C18, C19 |
| 7 | 1N4148W | footprint:SOD-123FL | D2, D3, D4, D9, D11, D12, D13 |
| 6 | 103 | footprint:R_1608 | R4, R5, R7, R13, R14, R17 |
| 5 | 104 | footprint:R_1608 | R6, R23, R24, R25, R26 |
| 5 | 105 | footprint:C_1005 | C10, C11, C21, C22, C24 |
| 4 | 102 | footprint:R_1608 | R2, R3, R8, R9 |
| 4 | 331 | footprint:R_1608 | R15, R16, R18, R19 |
| 4 | Hole 3.2mm | footprint:HOLE_3.2mm | H1, H2, H3, H4 |
| 4 | LED | footprint:LED_3mm | D5, D6, D7, D8 |
| 4 | TK25S06N1L | footprint:DPAK+ | Q11, Q12, Q13, Q14 |
| 3 | 2N7002 | footprint:SOT-23 | Q1, Q2, Q3 |
| 2 | 100uF | footprint:CAP_TH_5x11 | C4, C23 |
| 2 | 10ohm | footprint:R_1608 | R21, R22 |
| 2 | 10p | footprint:C_1005 | C6, C7 |
| 2 | 270 | footprint:R_1608 | R11, R12 |
| 2 | IRS2003 | footprint:SO-8 | U11, U12 |
| 2 | SBRT20M60SP5 | footprint:POWERDI5 | D1, D21 |
| 1 | 1000uF | footprint:CAP_TH_12_5 | C1 |
| 1 | 12MHz | footprint:FA-238_Crystal | Y1 |
| 1 | 12MHz_Resonator | footprint:SMD_Resonator_3213 | Y2 |
| 1 | 470uF | footprint:CAP_TH_8x11_5 | C3 |
| 1 | BOOT_SW | footprint:TS-0606 | SW1 |
| 1 | ConnModule | footprint:CommModuleTiny | CN1 |
| 1 | DC | footprint:TB111-2 | J7 |
| 1 | DC_Jack | footprint:BARREL_JACK | J1 |
| 1 | Debug | footprint:PinHeader_01x03 | J6 |
| 1 | External_Conn_1 | footprint:PinSocket_2x14_2_54mm | J4 |
| 1 | External_Conn_2 | footprint:PinSocket_2x14_2_54mm | J5 |
| 1 | M78AR033 | footprint:M78AR0XX | U5 |
| 1 | NMT | footprint:R_1608 | R10 |
| 1 | POWER | footprint:TS-0606 | SW2 |
| 1 | R010 | footprint:R_6432 | R1 |
| 1 | RAIL_POWER | footprint:TB111-2 | J2 |
| 1 | RESET | footprint:TS-0606 | SW3 |
| 1 | RF | footprint:XBee | U6 |
| 1 | RP2040 | footprint:RP2040-QFN-56 | U1 |
| 1 | TC75S103F | footprint:SOT-23-5 | U4 |
| 1 | USB_B | footprint:USB_B | J3 |
| 1 | W25Q16JVSN | footprint:SO-8 | U2 |
The 92 most common of 96 parts.
More from ytsurui/RP2040CommandStation
2- 2 layers95 × 72 mm
Similar boards
- 2 layers49 × 26 mm
- 2 layers100 × 100 mm
- 2 layers177 × 114 mm
- 2 layers130 × 180 mm
- 2 layers101.6 × 73.7 mm
- 2 layers108 × 57.5 mm
- 2 layers94.5 × 66 mm
Seiza ittose
TokyoTech-Astro/Planetarium
planetarium: 回路データ \ planetarium : 各年にデプロイされたシステム \ memo: メモ(モーターの型番や星座とプレートナンバーの対応などの基本情報)
36 parts1 - 2 layers60.6 × 31.8 mm
Questions
How big is the RP2040CommandStation PCB?
It measures 95 × 78 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RP2040CommandStation use?
96 parts, built around the RP2040, M78AR033-1, IRS2003PBF and W25Q16JVSNIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RP2040CommandStation KiCad files?
From the ytsurui/RP2040CommandStation repository on GitHub, at the commit this page was made from: the board is Board-UltraPower/KiCad6/RP2040CommandStation.kicad_pcb and its schematic Board-LargePower/KiCad6/RP2040CommandStation.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RP2040CommandStation design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).