
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

This is the source code of infrared remote control of the camera. (With washlette jack function)
UNKO JAMMER Mini is an open-source printed circuit board by yosihisa, from the yosihisa/UNKO_JAMMER_Mini repository on GitHub, published under the MIT licence. It is a 2-layer board of 33 × 49 mm with 10 parts on 8 nets, routed with 46 tracks and 2 vias.
Its parts include 3 switches, 1 capacitor, 1 resistor, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
UNKO_JAMMER_Mini is a camera infrared remote control. It can also handle washlets.
It is compatible with Nikon, Canon, Sony and LIXIL.
This repository is the source code of infrared remote control of the camera. (With washlette jack function)
Video is here.
ウンコジャマーはカメラ用赤外線リモコンです。ウォシュレットを操作することもできます。
Niko・Canon,Sonyの撮影コマンドとLIXILのおしりコマンドに対応しています。
PENTAXは今後のアップデートで対応予定です。
動画はこちらです。

コイン型リチウム電池(CR2032)を電池ボックスにセットします。
電池の上にある黒いスイッチの白のつまみを利用するカメラのメーカーに合わせます。
メーカー対応表
| メーカー | スイッチ1(上) | スイッチ2(下) |
|---|---|---|
| Nikon | OFF(左) | OFF(左) |
| Canon | ON (右) | OFF(左) |
| Sony | OFF (左) | ON (右) |
| PENTAX | ON (右) | ON (右) |
カメラをリモコン操作モードにします。(各機種の取扱説明書をご覧ください。)
左側のスライドスイッチをONにします。
LEDの下にある白いボタンを押すとシャッターを切ることができます。
撮影が終了したら左側のスライドスイッチをoFFにしましょう。
おしりコマンドを発動するためには白いボタンを押しながら電源を入れる必要があります。
白いボタンを押したまま電源を入れると、電源を切るまで白いボタンを押すたびにおしりコマンドが送信されます。
よしひさ(@n_yosihisa)
てぽ丼(@teppodone)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100 | Resistors_SMD:R_0603 | R1 |
| 1 | 100u | Capacitors_SMD:C_1206 | C1 |
| 1 | ATTINY10-P | user:DIP_SMD-8 | IC1 |
| 1 | C2032 | user:BC-2001 | BT1 |
| 1 | LED | user:3mmLED | D1 |
| 1 | LOGO | カメラリモコン:mode | G*** |
| 1 | ModeSelector | Buttons_Switches_SMD:SW_DIP_x2_W5.08mm_Slide_Copal_CHS-A | SW3 |
| 1 | POWER | user:SSSS213202_parallel | SW1 |
| 1 | RELEASE | user:SKRPACE010_kai | SW2 |
| 1 | Remote | Capacitors_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | J1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 33 × 49 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the yosihisa/UNKO_JAMMER_Mini repository on GitHub, at the commit this page was made from: the board is PCB/UNKO_JAMMER_Mini.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).