Skip to the content
2 layers92 × 82 mmTsac distribution, the printed circuit board in 3D

Tsac distribution

york-fs/tsac-distribution

The TSAC distribution board is the interface between the PCBs inside the TSAC and the rest of the LVS. It connects to the rear distribution via a 23-pin AMPSEAL connector and connects primarily to the BMS, IMD, and…

Size
92 × 82 mm
Copper layers
2
Thickness
1.6 mm
Parts
45
Nets
27
Pads
134
Tracks, vias
113, 365
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Apr 2026
Updated
26 Jun 2026

Overview

Tsac distribution is an open-source printed circuit board by york-fs, from the york-fs/tsac-distribution repository on GitHub. It is a 2-layer board of 92 × 82 mm with 45 parts on 27 nets, routed with 113 tracks and 365 vias.

Its parts include 16 connectors, 4 resistors and 1 capacitor.

README

README.md

TSAC Distribution Board

Revision Pad Count Via Count ERC Status DRC Status

The TSAC distribution board is the interface between the PCBs inside the TSAC and the rest of the LVS. It connects to the rear distribution via a 23-pin AMPSEAL connector and connects primarily to the BMS, IMD, and precharge PCB inside of the TSAC. It also provides split termination for the CAN bus.

Latest Release Interactive BOM

Render Preview

Cloning

A recursive clone must be used to download the kicad-library repository:

text
git clone --recursive https://github.com/york-fs/tsac-distribution.git

Parts

45
QtyValueFootprintReferences
12Conn_01x02yfs:MolexMicrofitPlus1x2J2, J21, J22, J23, J32, J33, J41, J42, J43, J44, J61, J62
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
3G***kibuzzard-6910B7D7kibuzzard-6910B7D7, kibuzzard-6910B7D7, kibuzzard-6910B7D7
22k2Resistor_SMD:R_0603_1608MetricR3, R4
262Resistor_SMD:R_1206_3216MetricR1, R2
2Conn_01x08yfs:MolexMicrofitPlus1x8J31, J45
2TestPointTestPoint:TestPoint_Keystone_5000-5004_MiniatureTP2, TP3
110nCapacitor_SMD:C_0603_1608MetricC1
1Conn_01x03yfs:MolexMicrofitPlus1x3J51
1Conn_01x23yfs:AMPSEAL-23-776087J1
1G***kibuzzard-6A354262kibuzzard-6A354262
1G***kibuzzard-6A354707kibuzzard-6A354707
1G***kibuzzard-6A07B875kibuzzard-6A07B875
1G***kibuzzard-6A3540DAkibuzzard-6A3540DA
1G***kibuzzard-6A354048kibuzzard-6A354048
1G***kibuzzard-6A3541C8kibuzzard-6A3541C8
1G***kibuzzard-6A35413Ckibuzzard-6A35413C
1G***kibuzzard-6A07B746kibuzzard-6A07B746
1G***kibuzzard-6940937Dkibuzzard-6940937D
1G***kibuzzard-6A088056kibuzzard-6A088056
1G***kibuzzard-6A354054kibuzzard-6A354054
1G***kibuzzard-6A07C1EFkibuzzard-6A07C1EF
1G***kibuzzard-6A35415Ckibuzzard-6A35415C
1LOGOLOGOG***
1TestPointTestPoint:TestPoint_Keystone_5019_MiniatureTP1

Similar boards

  • 2 layers30 × 61.3 mmModuleV440, the printed circuit board in 3D

    ModuleV440

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    45 parts1.1k
  • 2 layers97 × 78.5 mmDumbpad, the printed circuit board in 3D

    Dumbpad

    imchipwood/dumbpad

    Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

    45 parts517GPL-2.0
  • 2 layers49.8 × 88.9 mmLDG WING FOLD PLACARD, the printed circuit board in 3D

    LDG WING FOLD PLACARD

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    45 parts431
  • 2 layers26.5 × 34.4 mmPicoLoaderNSB, the printed circuit board in 3D

    PicoLoaderNSB

    makeo/PicoLoader

    A cheap and easy to install modchip for the Nintendo GameCube!

    45 parts320GPL-2.0
  • 2 layers40.2 × 19 mmOMGS3 Carrier R1, the printed circuit board in 3D

    OMGS3 Carrier R1

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    45 parts296
  • 2 layers63.5 × 63.5 mmMain pcb, the printed circuit board in 3D

    Main pcb

    peterkrull/quad

    Firmware, hardware and documentation for my autonomous quad copter project

    45 parts210GPL-3.0
  • 2 layers99.1 × 81.9 mmRC6502 Terminal, the printed circuit board in 3D

    RC6502 Terminal

    tebl/RC6502-Apple-1-Replica

    An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

    45 parts193GPL-3.0
  • 2 layers116.1 × 94.7 mmMiniDox, the printed circuit board in 3D

    MiniDox

    That-Canadian/MiniDox_PCB

    MiniDox Keyboard, PCB files

    45 parts169WTFPL

Questions

How big is the Tsac distribution PCB?

It measures 92 × 82 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tsac distribution use?

45 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tsac distribution KiCad files?

From the york-fs/tsac-distribution repository on GitHub, at the commit this page was made from: the board is tsac_distribution.kicad_pcb and its schematic tsac_distribution.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tsac distribution design in my own project?

Its repository states no licence, so its author keeps all rights: ask york-fs before reusing the design.