Skip to the content
2 layers21.6 × 16.9 mmSwd adapter, the printed circuit board in 3D

Enables a reliable connection between an ST-Link clone and a 1.27 mm 2×3 pin IDC connector. Power output can be configured for 3.3 V or 5 V (default: 5 V). Includes a red status LED to indicate power.

Size
21.6 × 16.9 mm
Copper layers
2
Thickness
1.61 mm
Parts
5
Nets
9
Pads
23
Tracks, vias
44, 3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 Oct 2025
Updated
22 Nov 2025

Overview

Swd adapter is an open-source printed circuit board by york-fs, from the york-fs/swd-adapter repository on GitHub. It is a 2-layer board of 21.6 × 16.9 mm with 5 parts on 9 nets, routed with 44 tracks and 3 vias.

Its parts include 2 connectors, 1 resistor and 1 diode. It belongs with the interfaces and adapters boards of this library.

README

README.md

SWD Programming Adapter

Enables a reliable connection between an ST-Link clone and a 1.27 mm 2×3 pin IDC connector.
Power output can be configured for 3.3 V or 5 V (default: 5 V).
Includes a red status LED to indicate power.

Usage

  • Connect the adapter to the ST-Link clone with the board facing upward.
  • Select the desired power level using the solder bridge:
    • 5 V is connected by default.
    • To switch to 3.3 V, cut the 5 V bridge and solder the 3.3 V bridge instead.
  • Verify your ST-Link clone’s pinout before making any connections.

Parts

5
QtyValueFootprintReferences
11kResistor_SMD:R_0603_1608MetricR1
1Conn_02x05_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_VerticalJ1
1Red LEDLED_SMD:LED_0603_1608MetricD1
1SWDyfs:IDC-Connector-2x3J2
1SolderJumper_3_Bridged12Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mmJP1

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the Swd adapter PCB?

It measures 21.6 × 16.9 mm and has 2 copper layers, 1.61 mm thick.

What parts does the Swd adapter use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Swd adapter KiCad files?

From the york-fs/swd-adapter repository on GitHub, at the commit this page was made from: the board is SWD_Adapter.kicad_pcb and its schematic SWD_Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Swd adapter design in my own project?

Its repository states no licence, so its author keeps all rights: ask york-fs before reusing the design.