
Doddle60
AcheronProject/Doddle60
Doddle60 is a 60% ISO layout PCB with a minimal layout number support intended for ISO users.

A PCB RFID Business card
Yiancar Designs is an open-source printed circuit board by yiancar, from the yiancar/PCB-Business-Card repository on GitHub. It is a 2-layer board of 85 × 55 mm with 7 parts on 5 nets, routed with 17 tracks and 2 vias.
It is built around the 19-217/R6C-AL1M2VY/3T. Its parts include 1 capacitor, 1 resistor, 1 IC and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | logos:Yiancar_text | LOGO | |
| 1 | 130pF | Capacitors_SMD:C_0603 | C1 |
| 1 | 19-217/R6C-AL1M2VY/3T | LEDs:LED_0603 | D1 |
| 1 | 650 | Resistors_SMD:R_0603 | R1 |
| 1 | Antenna_Loop | NXP_ antenna:L_PICC_CLASS4_50PF_01 | AE1 |
| 1 | NT3H2111 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
The 6 most common of 7 parts.

AcheronProject/Doddle60
Doddle60 is a 60% ISO layout PCB with a minimal layout number support intended for ISO users.

sbbxiii/The-Eagle
The Eagle: Custom STM32F405 4-Layer Autonomous Avionics Flight Controller PCB

ldab/SARA-Rx-application-board
SARA-R4 NB-IoT + Cat-M1 + GNSS application board - NINA-B3 with Secure MQTT

opencorp2030-ctrl/cartouche-usb4
Tiny USB4 (40 Gb/s) NVMe 2230 drive board (22 x 34 mm) for CARTOUCHE, a local AI you carry in your pocket. KiCad 9, Gerbers, BOM, STEP.

chipsalliance/rocket-pcb
PCB libraries and templates for rocket-chip based FPGA/ASIC designs

KarpelesLab/ledger_implant_detector
A small hand-held tool for spotting extra conductive structures hidden inside the plastic shell of a hardware wallet (e.g. a Ledger).

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

It measures 85 × 55 mm and has 2 copper layers, 0.6 mm thick.
7 parts, built around the 19-217/R6C-AL1M2VY/3T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the yiancar/PCB-Business-Card repository on GitHub, at the commit this page was made from: the board is Yiancar_Designs.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask yiancar before reusing the design.