
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

Design of a keyboard pad from scratch.
3x2-pad is an open-source printed circuit board by ygbuil, from the ygbuil/3x2-pad repository on GitHub. It is a 2-layer board of 64.3 × 61.9 mm with 12 parts on 29 nets, routed with 39 tracks and 2 vias.
Its parts include 5 diodes, 1 connector and 1 switch. It belongs with the keyboards and input boards of this library.
This project is a custom-built 5-key keyboard pad designed and developed entirely from scratch. It’s powered by a Pro Micro microcontroller and is fully compatible with VIA Software, a powerful configuration tool for custom keyboards.
Custom PCB Design
I designed the PCB from the ground up using KiCad, an open-source electronics design automation suite. The design files were sent to a professional manufacturer for production.
Manual Assembly
Once the PCBs arrived, I soldered all components including diodes, Pro Micro and hotswap sockets.
Firmware Development
I created and flashed the keyboard's firmware using QMK Firmware, an open source software widely used in the mechanical keyboard community. The keyboard is VIA-compatible. VIA is a user-friendly software that enables real-time keyboard customization through a simple graphical interface, allowing for key remaps, creation of macros, configuration of layers and more, without any coding involved.
Kicad modelling:
Soldering:
Final product:

| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5 |
| 5 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1u | MX1, MX2, MX3, MX4, MX5 |
| 1 | Conn_02x12_Top_Bottom | PCM_marbastlib-xp-promicroish:ProMicro_USBup | J1 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2u | S1 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 64.3 × 61.9 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ygbuil/3x2-pad repository on GitHub, at the commit this page was made from: the board is kicad/3x2_pad.kicad_pcb and its schematic kicad/3x2_pad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ygbuil before reusing the design.