

12 MZ-2000拡張基板11
MZ-2000SIO拡張基板
- Size
- 115 × 143 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 174
- Pads
- 463
- Tracks, vias
- 2,266, 109
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Oct 2024
- Updated
- 8 Oct 2024
Overview
12 MZ-2000拡張基板11 is an open-source printed circuit board by yama1770, from the yama1770/MZ-2000SIO repository on GitHub, published under the MIT licence. It is a 2-layer board of 115 × 143 mm with 35 parts on 174 nets, routed with 2,266 tracks and 109 vias.
It is built around the 74LS245SC, 74HC138 and 74LS273PC, with the 74AHC04D, 74LS139PC and 74LS20P-E among its other parts. Its parts include 17 ICs, 16 capacitors and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
674LS245SC
-0℃~+70℃ 12ns@5V,45pF 15mA 24mA 4.75V~5.25V 74LS 8 Bidirectional Output enable Schmitt trigger Tri-State - Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74HC138
SOP-160℃~+70℃ 24ns@5.0V,16pF 2V~6V 3/8 5.2mA 5.2mA 5uA 74HC Decoder Reverse function Single Supply SOP-16 Signal Switches, Multiplexers, Decoders ROHSGRSignal Switches, Multiplexers, Decoders74LS273PC
PDIP-201 15ns 27mA 27ns@5V,15pF 30MHz 5ns 74LS Series 8 D-Type Reset Rising Edge PDIP-20 Flip Flops ROHSonsemiFlip Flops74AHC04D
SOIC-14-40℃~+125℃ 1 1.5V~3.85V 1.9V、2.9V、4.4V 2V~5.5V 2uA 500mV~1.65V 6 7.5ns@5V,50pF 74AHC 8mA 8mA SOIC-14 Inverters ROHSNexperiaInverters74LS139PC
PDIP-1622ns 74LS 8mA Decoder Single Supply PDIP-16 Signal Switches, Multiplexers, DecodersonsemiSignal Switches, Multiplexers, Decoders74LS20P-E
DIP-14-20℃~+75℃ 15ns@5V,15pF 2 2.7V 2V 4 4.75V~5.25V 400mV、500mV 400uA 74LS 800mV 8mA NAND Gate DIP-14 Logic Gates ROHSRenesas ElectronicsLogic Gates
README
README.mdMZ-2000SIO拡張基板
IPLROMをMZ-2000IPL.hexに書き換える。 シリアル通信とROM起動が行える。 ROM起動は最大4個まで登録可能。 起動時に/,A,B,Dのどれかのキーを押すことにより選択可能。 8255はNEC制(UPD8255)を使用してください、東芝製は動作しませんでした。
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 0.1u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3, C16, C17, C18, C20, C30, C31, C50, C51, C52, C53, C54, C55, CJ1 |
| 3 | 74HC138 | Package_DIP:DIP-16_W7.62mm_LongPads | IC3, IC53, IC54 |
| 3 | 74LS273 | Package_DIP:DIP-20_W7.62mm_LongPads | IC16, IC17, IC55 |
| 2 | 27C512 | Package_DIP:DIP-28_W15.24mm_LongPads | IC30, IC31 |
| 1 | 74AHC04 | Package_DIP:DIP-14_W7.62mm_LongPads | IC51 |
| 1 | 74LS139 | Package_DIP:DIP-16_W7.62mm_LongPads | IC50 |
| 1 | 74LS20 | Package_DIP:DIP-14_W7.62mm_LongPads | IC52 |
| 1 | 74LS245 | Package_DIP:DIP-20_W7.62mm_LongPads | IC18 |
| 1 | 82C55A | Package_DIP:DIP-40_W15.24mm_LongPads | IC20 |
| 1 | Arduino_Pro_Mini | 00_My Lib:Arduino_Pro_Mini | IC21 |
| 1 | Micro_SD_Card_Kit | 00_My Lib:AE-microSD-LLCNV | J5 |
| 1 | ~ | Package_DIP:DIP-40_W15.24mm_LongPads | IC2 |
| 1 | ~ | 00_My Lib:MZ200_BUS_REV2 | J1 |
| 1 | ~ | 00_My Lib:AE-CH340-TYPEC | U3 |
| 1 | ~ | Package_DIP:DIP-28_W15.24mm_LongPads | IC1 |
Similar boards
- 2 layers295 × 195 mm

- 2 layers450 × 160 mm

- 2 layers426 × 307 mm

I7000
felipesanches/Itautec_I7000_KICAD
Esquemáticos do computador Itautec I-7000 G desenhados a partir de inspeção do circuito das PCBs
115 parts - 2 layers301.9 × 194.8 mm

TRS80 Model I EI RevD
RetroStack/TRS-80-Model-I-Expansion-Interface-Rev-D
Hardware Replica of the TRS-80 Model I Expansion Interface - Revision D
185 partsMIT - 6 layers244 × 244 mm

Retroslop
CPTforever/8088-MicroATX-Computer
A 8088 based, IBM 5150 like computer compatible with the MicroATX motherboard form factor.
193 parts - 2 layers106.3 × 85.1 mm

Pman if
pozsarzs/zacchaeus
8-bit microcomputer built from commercially available and home-built components
39 partsEUPL-1.2 - 2 layers253.2 × 203 mm

Pegasus2023
NeilsVintageComputers/1981_Aamber-Pegasus-2023-Revival
My first computer, this is a replica I produced from the original schematics using original old components.
156 partsUnlicense - 2 layers370.8 × 298.5 mm

8 Bit Computer
The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.
323 parts142
Questions
How big is the 12 MZ-2000拡張基板11 PCB?
It measures 115 × 143 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 12 MZ-2000拡張基板11 use?
35 parts, built around the 74LS245SC, 74HC138, 74LS273PC and 74AHC04D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 12 MZ-2000拡張基板11 KiCad files?
From the yama1770/MZ-2000SIO repository on GitHub, at the commit this page was made from: the board is 12_MZ-2000拡張基板11/12_MZ-2000拡張基板11.kicad_pcb and its schematic 12_MZ-2000拡張基板11/12_MZ-2000拡張基板11.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 12 MZ-2000拡張基板11 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).