4 layers160 × 100 mm
Transmitter
yacremann/TimeDistributionSystem
Time distribution system for pulsed laser laboratories
279 partsGPL-3.0
4 layers160 × 100 mm
Receiver
yacremann/TimeDistributionSystemTime distribution system for pulsed laser laboratories
- Size
- 160 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 239
- Nets
- 295
- Pads
- 1,012
- Tracks, vias
- 2,159, 421
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Mar 2025
- Updated
- 11 Mar 2025
Overview
Receiver is an open-source printed circuit board by yacremann, from the yacremann/TimeDistributionSystem repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 160 × 100 mm with 239 parts on 295 nets, routed with 2,159 tracks and 421 vias.
It is built around the DS15EA101SQ, NB3L8504SDT and TPS563207DRL, with the TPS62205DBV, SN65LVDS4RSE and 74AUP1G79GW among its other parts. Its parts include 93 capacitors, 51 resistors, 22 ICs, 16 connectors and 6 diodes.
Main components
12
DS15EA101SQ
WQFN-16-EP(4x4)-40℃~+85℃ 1.5Gbps 3.3V WQFN-16-EP(4x4) Interface - Specialized ROHSTexas InstrumentsInterface - Specialized
NB3L8504SDT
TSSOP-16-40℃~+85℃ 1 2.375V~3.63V 4 700MHz TSSOP-16 Clock Buffers, Drivers, Distributors ROHSonsemiClock Buffers, Drivers, Distributors
TPS563207DRL
SOT-563-40℃~+150℃ 1 3A 4.3V~17V 580kHz 806mV~7V Adjustable Buck Buck Built-in Yes SOT-563 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
TPS62205DBV
SOT-23-5-40℃~+85℃@(TA) 1 1MHz 2.5V 2.5V~6V 300mA Buck Buck Built-in Fixed Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
SN65LVDS4RSE
QFN101.8V High-Speed Differential Line ReceiverTexas InstrumentsUncategorised
74AUP1G79GW
TSSOP-5-1.3mm-300ps -40℃~+125℃ 0.8pF 1 1 1.4uA 2ns@3V,5pF 400ps 4mA 4mA 619MHz 74AUP Series 800mV~3.6V D-Type Rising Edge TSSOP-5-1.3mm Flip Flops ROHSNexperiaFlip Flops
MC100EPT21D
SOIC-8-40℃~+85℃ 1 1 24mA 3V~3.6V 3V~3.6V 3mA Integrated pull-up resistor LVPECL、CML、LVDS LVTTL、LVCMOS Level translator Unidirectional SOIC-8 Translators, Level Shifters ROHSonsemiTranslators, Level Shifters
NB7V52MMN
QFN161.8V/2.5V Differential D Flip-Flop w/Reset and CML OutputsonsemiUncategorised
93LC56B
SOT-23-6SOT-23-6 New Arrivals ROHSMicrochip TechnologyUncategorised
ADM7171ACPZ-1.8-R7
LFCSP-8(3x3)-40℃~+125℃@(Tj) 1 1.8V 135mV@(1A) 1A 2mA 5uVrms 6.5V Fixed Over Current Protection、Thermal shutdown、Enable control、Input under-voltage protection、Adjustable soft-start、Built-in soft-start Positive LFCSP-8(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
FT2232HQ
QFN64Dual High Speed USB To Multipurpose UART/FIFO ICFTDIUncategorised
SCAN921226HSM
BGA-49(7x7)-40℃~+125℃ 1 10 3V~3.6V 800Mbps Clock synchronization and data alignment、Link status monitoring、Built-in phase-locked loop Deserializer BGA-49(7x7) Serializers, Deserializers ROHSTexas InstrumentsSerializers, Deserializers
README
README.mdTime Distribution System for Lab Based Experiments
This project implements a time distribution system for laboratory based experiments using pulsed lasers. It consists of a transmitter and several receivers. The transmitter generates a unique pulse-id number for each laser pulse. This pulse-id, together with configuration information is transmitted to the receivers over twisted-pair cables (use Cat 6A cables only!). A magnetic RAM is used to store the last value and to recover after a power outage.
The receivers decode the pulse-id send it to FPGAs on individual instruments (framegrabber boards, digitizers, ...) for time stamping the data. In addition, the receivers generate low-jitter trigger signals. These can be configured from the transmitter.
The project contains the following components:
- Boards: Schematics and layouts of the printed circuit boards for the receiver and transmitter
- Firmware: Logic on the FPGAs as well as firmware running on an embedded RISC-V processor for the transmitter and receivers
- Tango: Device servers for the transmitter and to configure the trigger channels of the receivers (see tango-controls.org)
- Notes: Presentation with the block diagrams of the system
Requirements:
- For simulating the individual components of the firmware: Cocotb, Verilator
- For synthesis: Quartus (intel) v. 23.1 standard edition
- For the software on the RISC-V: gcc for RV32IM (see https://github.com/SpinalHDL/VexRiscv)
- Tango control system: https://tango-controls.org
The project contains the following 3rd party components: Firmware:
- CRC generator (https://github.com/hellgate202/crc_calc.git)
- Softcore: Based on the VexRiscV project (https://github.com/SpinalHDL/VexRiscv)
- TinyDuino_lib: developed by Domenic Wüthrich as a semester project at ETH Zurich, institute for integrated systems.
- fifo_v3: https://github.com/pulp-platform/common_cells/blob/master/src/fifo_v3.sv (ETH Zurich and University of Bologna)
License: GNU Public License v3.0 (see LICENSE)
Parts
239| Qty | Value | Footprint | References |
|---|---|---|---|
| 47 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C3, C10, C11, C12, C15, C17, C18, C19, C28, C29, C30, C31, C32, C33, C34 +31 |
| 18 | 100n | Capacitor_SMD:C_0402_1005Metric | C20, C21, C37, C39, C40, C47, C48, C50, C51, C52, C53, C54, C56, C57, C85, C86 +2 |
| 15 | TestPoint | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP22, TP23 |
| 14 | 50 | Resistor_SMD:R_0603_1608Metric | R11, R12, R13, R14, R15, R16, R35, R36, R37, R38, R48, R49, R50, R51 |
| 11 | 30 | Inductor_SMD:L_0402_1005Metric | FB1, FB2, FB3, FB4, FB5, FB6, FB7, FB8, FB9, FB10, FB11 |
| 9 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R18, R20, R24, R27, R28, R29, R40, R44 |
| 7 | 100 | Resistor_SMD:R_0603_1608Metric | R3, R4, R6, R17, R33, R34, R47 |
| 7 | 10u | Capacitor_SMD:C_0603_1608Metric | C70, C71, C72, C73, C74, C78, C79 |
| 4 | D_Zener | Diode_SMD:D_0805_2012Metric | D3, D4, D6, D7 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 4 | SN65LVDS4 | Package_DFN_QFN:Texas_R-PUQFN-N10 | U4, U8, U11, U19 |
| 3 | 0 | Resistor_SMD:R_0603_1608Metric | R31, R32, R42 |
| 3 | 10u | Inductor_SMD:L_1008_2520Metric | L2, L4, L5 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R7, R19, R23 |
| 3 | 1n | Capacitor_SMD:C_0603_1608Metric | C60, C62, C75 |
| 3 | 22u | Capacitor_SMD:C_0603_1608Metric | C77, C80, C81 |
| 3 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C4, C42, C44 |
| 3 | BSS123 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | Conn_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J11, J12, J13 |
| 3 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1.5mm | FID1, FID2, FID3 |
| 3 | GND | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP19, TP20, TP21 |
| 3 | R | Resistor_SMD:R_0603_1608Metric | R21, R22, R30 |
| 2 | 0.22u | Capacitor_SMD:C_0603_1608Metric | C22, C24 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C26, C27 |
| 2 | 1n | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | 3.3u | Inductor_SMD:L_Bourns-SRN8040_8x8.15mm | L1, L3 |
| 2 | 3.9n | Capacitor_SMD:C_0603_1608Metric | C23, C25 |
| 2 | 30p | Capacitor_SMD:C_0603_1608Metric | C2, C7 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R25, R26 |
| 2 | 5.6k | Resistor_SMD:R_0603_1608Metric | R45, R46 |
| 2 | 74AUP1G79GW | Package_TO_SOT_SMD:SOT-353_SC-70-5_Handsoldering | U12, U20 |
| 2 | MC100EPT21 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U13, U22 |
| 2 | NB7V52M | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.9x1.9mm | U10, U21 |
| 2 | PGB1010603 | Diode_SMD:D_0603_1608Metric | D1, D2 |
| 1 | +1.8V | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP4 |
| 1 | +15V | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1 |
| 1 | +2.5V | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP3 |
| 1 | +3.3V | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP2 |
| 1 | +5V | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP18 |
| 1 | 0 | Resistor_SMD:R_1206_3216Metric | R41 |
| 1 | 1.2k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 10p | Capacitor_SMD:C_0603_1608Metric | C84 |
| 1 | 12M | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 150 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 30.9k | Resistor_SMD:R_0603_1608Metric | R43 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 56.2k | Resistor_SMD:R_0603_1608Metric | R39 |
| 1 | 93LC56B | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | AD9544 | Package_CSP:LFCSP-48-1EP_7x7mm_P0.5mm_EP4.1x4.1mm | U7 |
| 1 | ADM7171ACPZ-1.8-R7 | Package_CSP:LFCSP-8-1EP_3x3mm_P0.5mm_EP1.45x1.74mm | U18 |
| 1 | ASV-40MHz | Oscillator:Oscillator_SMD_Abracon_ASV-4Pin_7.0x5.1mm | X1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Conn_01x13 | Connector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_Vertical | J7 |
| 1 | DS15EA101 | Package_DFN_QFN:WQFN-16-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U3 |
| 1 | FT2232HQ | Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP4.35x4.35mm | U16 |
| 1 | Input | Connector_RJ:RJ45_Amphenol_RJHSE5380 | J4 |
| 1 | LM809 | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | MAX10M16SCE | footprint:EQFP_144 | U5 |
| 1 | NB3L8504S | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U9 |
| 1 | Prog. | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J8 |
| 1 | Pulse out 1 | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J2 |
| 1 | Pulse out 2 | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J3 |
| 1 | Pulse out 3 | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J15 |
| 1 | Pulse out 4 | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J16 |
| 1 | Pulse_ID_1 out | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J1 |
| 1 | Pulse_ID_2 out | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J14 |
| 1 | Ref_mon | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J6 |
| 1 | SCAN921226H | Package_BGA_2:BGA-49_7x7_7.0x7.0mm | U6 |
| 1 | SPI | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | TPS563200 | Package_TO_SOT_SMD:SOT-23-6 | U17 |
| 1 | TPS563207 | footprint:SOT-563 | U14 |
| 1 | TPS62205DBV | Package_TO_SOT_SMD:SOT-23-5 | U15 |
| 1 | USB_C | Connector_USB:USB_C_Receptacle_Amphenol_12401610E4-2A_CircularHoles | J10 |
More from yacremann/TimeDistributionSystem
1Similar boards
- 4 layers96 × 70 mm
- 2 layers96 × 61.9 mm
Frequenzteiler
eduphys/frequency-divider
This repository contains the schematics and firmware for a frequency divider used in an experiment for time resolved transmission electron microscopy.
45 parts - 2 layers65 × 56 mm
- 2 layers70 × 79 mm
- 4 layers49.1 × 15.5 mm
Programmer Board
MichalVarsanyi/VoxLink
VoxLink is a high-speed solution that allows interfacing of up to 100 sensors using a single high-speed host device.
58 parts1MIT - 6 layers71 × 126 mm
QuasarSDR
petrinm/QuasarSDR-Hardware
Hardware design files are disrtributed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal licence.
454 parts7CERN-OHL-W-2.0 - 4 layers51.3 × 57.3 mm
- 4 layers44 × 64 mm
JTAGProgrammer
anthony-bernaert/ftdi-jtag-programmer
FTDI-based JTAG Programmer Circuit for FPGAs
122 parts77CERN-OHL-P-2.0
Questions
How big is the Receiver PCB?
It measures 160 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Receiver use?
239 parts, built around the DS15EA101SQ, NB3L8504SDT, TPS563207DRL and TPS62205DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Receiver KiCad files?
From the yacremann/TimeDistributionSystem repository on GitHub, at the commit this page was made from: the board is Boards/Receiver/Receiver.kicad_pcb and its schematic Boards/Receiver/CDR_PLL.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Receiver design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).