Skip to the content
2 layers22 × 20 mmTps62913-module, the printed circuit board in 3D

低ノイズの降圧型DC-DCコンバータ TPS62913 を搭載したモジュール(最大3A,可変出力)

Size
22 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
10
Pads
64
Tracks, vias
156, 9
Pours
6
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
8 Sep 2021
Updated
30 Nov 2021

Overview

Tps62913-module is an open-source printed circuit board by y2kblog, from the y2kblog/tps62913-module repository on GitHub, published under the MIT licence. It is a 2-layer board of 22 × 20 mm with 27 parts on 10 nets, routed with 156 tracks and 9 vias.

It is built around the TPS62913RPU. Its parts include 16 capacitors, 3 resistors, 1 IC, 1 connector and 1 inductor.

Main components

1

README

README.md

TPS62913 低ノイズ・低リップル 可変出力降圧モジュール

概要

低ノイズ・低リップルの降圧型DC/DCコンバータ TPS62913 (Texas Instruments Inc.製) を搭載したモジュールです。
低ノイズLDOに匹敵する20µVRMSの1/fノイズと、IC内蔵のフェライトビーズLCフィルタ補償機能による10µVRMS未満の低リップルを実現しており、ノイズの影響を受けやすいアプリケーション(例:実験用精密電源、高速ADC、レーダー)の電源供給に適しています。
また、スイッチングレギュレータのため最大3.0Aの電流を出力できます。

仕様

  • 入力電圧:3.0~17.0V
  • 出力電圧:0.9~5.1V (基板上の半固定抵抗で調整)
  • 最大出力電流:3.0A
  • 1/fノイズ:20µVRMS (100Hz~100kHz)
  • 電圧リップル:10µVRMS未満 (typ.)
  • イネーブルピン付き
  • パワー・グッドピン付き
  • 出力放電機能:有効
  • ソフトスタート時間:10.7ms (typ.)
  • 基板サイズ:20mm × 22mm
  • ピン間隔:2.54mm

販売

スイッチサイエンス委託販売ページ
※大量注文や在庫に関する問い合わせはこちらまでご連絡ください。

ピンアサイン

#ピン名表面シルク説明
1VINI電源入力
2GNDGグラウンド(基準電位)
3VOUTO電源出力
4ENEイネーブル
デフォルトではENピンはVINピンに基板内部で接続されており、常時出力ONです。基板裏面のJP1ショートジャンパをカッター等で切断するとENピンによる出力ON/OFF制御が可能になり、ENピンに約1V以上を印加すると出力がONになります。
5PGPパワー・グッド
VOUTがパワー・グッド閾値電圧を下回るとGNDと同等の電圧となります。出力電圧が良好な場合はVOUTと同等の電圧となります。

回路図

基板寸法

資料

License

MIT License, see /LICENSE.

Parts

27
QtyValueFootprintReferences
1210upassive_parts:C_0603C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12
210upassive_parts:C_0805C13, C14
2MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2
11.8kpassive_parts:R_0603R2
1100kpassive_parts:R_0603R3
110kpassive_parts:VR_3362P-1RV1
110npassive_parts:C_0603FB1
11upassive_parts:C_0402C16
12.2npassive_parts:C_0402C15
12.2uinductor_SWPA:SWPA-2020L1
142.2kpassive_parts:R_0603R1
1Conn_01x05connector:SIL-5J1
1SolderJumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1
1TPS62913TPS6291x:TPS6291xU1

Similar boards

  • 2 layers47.6 × 27.3 mmMmc usb 1, the printed circuit board in 3D

    Mmc usb 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    27 parts1.2k
  • 2 layers77.4 × 77.4 mmCORAZON LEDS CON FADE, the printed circuit board in 3D

    CORAZON LEDS CON FADE

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    27 parts915
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers22 × 42 mmNvme bm to e, the printed circuit board in 3D

    Nvme bm to e

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    27 parts253GPL-3.0
  • 2 layers80 × 61 mmPicoProducer, the printed circuit board in 3D

    PicoProducer

    pjgpetecodes/pico-streamdeck

    This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.

    27 parts230MIT
  • 2 layers186 × 45 mmAddOnD, the printed circuit board in 3D

    AddOnD

    freeDSP/freeDSP-aurora

    freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

    27 parts226CC-BY-SA-4.0

Questions

How big is the Tps62913-module PCB?

It measures 22 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tps62913-module use?

27 parts, built around the TPS62913RPU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tps62913-module KiCad files?

From the y2kblog/tps62913-module repository on GitHub, at the commit this page was made from: the board is hardware/tps62913-module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tps62913-module design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).