4 layers188 × 103 mm
CAN DISPLAY
VladxIL/NMEA2000_0183_Display
Display NMEA2000 and NMEA0183 on DWIN 7" Display
130 partsGPL-3.0
2 layers50 × 65 mm
Adapter from IBIS to USB
- Size
- 50 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 25
- Pads
- 84
- Tracks, vias
- 311, 54
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Jun 2025
- Updated
- 3 Jun 2025
Overview
IBIS is an open-source printed circuit board by xtomasnemec, from the xtomasnemec/IBIS2USB repository on GitHub. It is a 2-layer board of 50 × 65 mm with 25 parts on 25 nets, routed with 311 tracks and 54 vias.
It is built around the CH340G, 1N4749A and BC337, with the BC547 and BC556 among its other parts. Its parts include 10 resistors, 4 capacitors, 3 diodes, 2 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
5
CH340G
SOP-16-40℃~+85℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
1N4749A
DO-41Zener DiodesLGE
BC337
TO-92-31 NPN 100 100MHz 100nA 45V 5V 625mW 700mV 800mA NPN TO-92-3 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)BC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)BC556
TO-92-55℃~+150℃ 1 PNP 100mA 100nA 150MHz 300mV 5V 625mW 65V 800 PNP TO-92 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
readme.mdIBIS to USB Converter
This project is a hardware solution for communicating with miscelaneous IBIS devices (BUSE BS210 etc.)
Features
- Converts IBIS protocol to USB (virtual COM port)
- Mini USB
- Open hardware design (schematics and PCB in KiCad)
Getting Started
- Open the schematic and PCB files in KiCad.
- Manufacture the PCB and assemble the components as specified.
- Connect the IBIS and USB.
- Use PuTTY to comunicate (1200 bit/s, 7 bits, even parity, 2 stop bits) or IBIS-Wagenbus Utility
License
This project is open-source. See the LICENSE file for details.
Credits
Developed by xtomasnemec. Original IBIS to RS232 converter here.
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1u | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mm | C3, C4 |
| 2 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D1, D2 |
| 2 | 33p | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mm | C1, C2 |
| 2 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R10 |
| 1 | 12MHz | Crystal:Crystal_HC49-4H_Vertical | X1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 1N4749A | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
| 1 | 27K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 3K3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 4K7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 6K8 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 820 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 1 | BC337 | Package_TO_SOT_THT:TO-92_Inline | T1 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline | T0 |
| 1 | BC556 | Package_TO_SOT_THT:TO-92_Inline | T2 |
| 1 | CH340G | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | LOGO | Logo:ocasnicek | G*** |
| 1 | Screw_Terminal_01x06 | TerminalBlock_WAGO:TerminalBlock_WAGO_233-506_2x06_P2.54mm | J2 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Wuerth_65100516121_Horizontal | J1 |
Questions
How big is the IBIS PCB?
It measures 50 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IBIS use?
25 parts, built around the CH340G, 1N4749A, BC337 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IBIS KiCad files?
From the xtomasnemec/IBIS2USB repository on GitHub, at the commit this page was made from: the board is IBIS.kicad_pcb and its schematic IBIS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IBIS design in my own project?
Its repository states no licence, so its author keeps all rights: ask xtomasnemec before reusing the design.
Similar boards
- 2 layers113.3 × 84.4 mm
Signal Conditioner R3
DanMartins/Signal_Conditioner
PCB signal conditioner implemented using KiCAD
41 partsGPL-3.0 - 2 layers219 × 63 mm
- 2 layers76.6 × 21.5 mm
Power Breakout
EmbeddedDesign/GotT-Translation-Circuit
A Bluetooth voice modulator for Dalek speech
18 parts2MIT - 2 layers198.1 × 193 mm
STE25
stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.
252 parts5BSD-2-Clause - 2 layers185 × 82 mm
Display board
Majklzbastlirny/NixieClock
ESP-IDF firmware for a 6-tube multiplexed ESP32 nixie clock (WiFi/SNTP, Home Assistant, web UI, alarm, temperatures)
112 parts1GPL-3.0 - 2 layers60 × 87.8 mm
- 2 layers241.3 × 190.5 mm
