2 layers33 × 34 mm
Analog terminal bell
tenderlove/analog-terminal-bell
A bell for your terminal that is analog
12 parts494MIT
2 layers71 × 79 mm
Board v00
xtarke/iot_lock- Size
- 71 × 79 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 47
- Pads
- 79
- Tracks, vias
- 69, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Jul 2022
- Updated
- 7 Feb 2025
Overview
Board v00 is an open-source printed circuit board by xtarke, from the xtarke/iot_lock repository on GitHub. It is a 2-layer board of 71 × 79 mm with 16 parts on 47 nets, routed with 69 tracks and 0 vias.
It is built around the TIP122. Its parts include 4 resistors, 3 diodes, 3 connectors, 2 capacitors and 2 ICs. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdiot_lock
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R5 |
| 2 | 1N5401 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D2, D3 |
| 2 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | DOIT-ESP32-DEVKIT-V1 | esp32-devkit:ESP32-DOIT-DEVKIT | U1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U2 |
| 1 | RDM6300 | rdm:RDM6300 | RDM1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | TIP122 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q1 |
Questions
How big is the Board v00 PCB?
It measures 71 × 79 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Board v00 use?
16 parts, built around the TIP122. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Board v00 KiCad files?
From the xtarke/iot_lock repository on GitHub, at the commit this page was made from: the board is hardware/board_v00/board_v00.kicad_pcb and its schematic hardware/board_v00/board_v00.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Board v00 design in my own project?
Its repository states no licence, so its author keeps all rights: ask xtarke before reusing the design.
Similar boards
- 2 layers130 × 80 mm
Pico controller
cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source
125 parts8GPL-3.0 - 2 layers180 × 90 mm
- 2 layers57.4 × 53.8 mm
Red node with ESP32
futureshocked/NodeRed-ESP32-TerrariumController
This repository contains ESP32 sketches and Node-RED flows from the course "NodeRed ESP32 Make a Terrarium Controller".
25 parts7MIT - 2 layers95.1 × 93.8 mm
TeCoLab Board
ytcsc/TeCoLab
TeCoLab stands for Temperature Control Laboratory. It is a low-cost open-source didactic framework to test the performance of several control strategies regarding temperature control.
61 parts7MIT - 2 layers
LEDControlPCBSMDV2
BioARTS-Lab/Miniature_Microscope
3D-printed fluorescence miniature microscope
31 parts6GPL-3.0 - 2 layers138 × 77 mm
- 2 layers68 × 50.5 mm
Fanspeed
Aniket95-code/Fan-Speed-Controller-NE555-PCB-design
A simple, low-cost DC fan speed controller built around the classic NE555 timer IC operating in astable mode. Fan speed is adjusted by varying the PWM duty cycle via a potentiometer, while a TIP122 Darlington transistor…
19 parts2