2 layers66.9 × 74.5 mm
2 layers20 × 50 mm
AngleIndicator
xsuz/Device-AngleIndicator舵角計および風見
- Size
- 20 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 34
- Pads
- 89
- Tracks, vias
- 134, 96
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Nov 2024
- Updated
- 28 Aug 2025
Overview
AngleIndicator is an open-source printed circuit board by xsuz, from the xsuz/Device-AngleIndicator repository on GitHub. It is a 2-layer board of 20 × 50 mm with 20 parts on 34 nets, routed with 134 tracks and 96 vias.
Its parts include 6 capacitors, 6 resistors, 4 ICs, 2 connectors and 1 diode. It belongs with the STM32 boards of this library.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C6 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R6 |
| 1 | 1.0u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | Conn_01x04 | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J2 |
| 1 | Conn_01x06 | Connector_JST:JST_ZH_B6B-ZR_1x06_P1.50mm_Vertical | J1 |
| 1 | LED | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LOGO | AIOLIA:AIOLIA | G*** |
| 1 | STM32G441KBTx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U2 |
| 1 | ~ | AIOLIA:SOT95P280X130-5N | U1 |
| 1 | ~ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-23-8_Handsoldering | U3 |
Questions
How big is the AngleIndicator PCB?
It measures 20 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AngleIndicator use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AngleIndicator KiCad files?
From the xsuz/Device-AngleIndicator repository on GitHub, at the commit this page was made from: the board is circuit/AngleIndicator/AngleIndicator.kicad_pcb and its schematic circuit/AngleIndicator/AngleIndicator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AngleIndicator design in my own project?
Its repository states no licence, so its author keeps all rights: ask xsuz before reusing the design.
Similar boards
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772