Skip to the content
2 layers47.9 × 36.1 mmPrintlight, the printed circuit board in 3D

Printlight

xLordiz3/PCBs
Size
47.9 × 36.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
8
Pads
20
Tracks, vias
41, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
11 Oct 2022
Updated
11 Oct 2022

Overview

Printlight is an open-source printed circuit board by xLordiz3, from the xLordiz3/PCBs repository on GitHub. It is a 2-layer board of 47.9 × 36.1 mm with 7 parts on 8 nets, routed with 41 tracks and 0 vias.

Its parts include 2 connectors, 1 resistor, 1 IC, 1 diode and 1 transistor.

Parts

7
QtyValueFootprintReferences
12N7000Package_TO_SOT_THT:TO-92_Inline_WideQ1
1DDiode_THT:D_DO-34_SOD68_P7.62mm_HorizontalD1
1DC-DC-STEP-UP-MT3608My:DC-DC-STEP-UP-MT3608U1
1LED OutConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ2
1R 10KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1RPi InConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ1
1SANYOU_SRD_Form_ARelay_THT:Relay_SPST_SANYOU_SRD_Series_Form_AK1

More from xLordiz3/PCBs

12
  • 2 layers93.2 × 59.2 mmUVLightV2-5, the printed circuit board in 3D

    UVLightV2-5

    xLordiz3/PCBs

    53 parts
  • 2 layers88.9 × 82.6 mmReflowplate, the printed circuit board in 3D

    Reflowplate

    xLordiz3/PCBs

    44 parts
  • 2 layers65.4 × 66.8 mmUVLight, the printed circuit board in 3D

    UVLight

    xLordiz3/PCBs

    38 parts
  • 2 layers91 × 96.6 mmHavac, the printed circuit board in 3D

    Havac

    xLordiz3/PCBs

    23 parts
  • 2 layers33.2 × 23 mmSmartblah, the printed circuit board in 3D

    Smartblah

    xLordiz3/PCBs

    20 parts
  • 2 layers111.5 × 93.7 mmHavacv1, the printed circuit board in 3D

    Havacv1

    xLordiz3/PCBs

    19 parts
  • 2 layers47.8 × 23.9 mmRelaymodule, the printed circuit board in 3D

    Relaymodule

    xLordiz3/PCBs

    14 parts

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the Printlight PCB?

It measures 47.9 × 36.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Printlight use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Printlight KiCad files?

From the xLordiz3/PCBs repository on GitHub, at the commit this page was made from: the board is printlight/printlight.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Printlight design in my own project?

Its repository states no licence, so its author keeps all rights: ask xLordiz3 before reusing the design.