
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

Sensing audio visual PCB is an open-source printed circuit board by XiwenG1234, from the XiwenG1234/sensing_audio_visual_PCB repository on GitHub. It is a 2-layer board of 81 × 51.5 mm with 36 parts on 19 nets, routed with 118 tracks and 23 vias.
It belongs with the audio and music boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | IR Emitter | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | IR Emitter, IR Emitter, IR Emitter, IR Emitter |
| 4 | IR Receiver | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | IR Receiver 1, IR Receiver 2, IR Receiver 3, IR Receiver 4 |
| 4 | R_receiver | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_for_receiver, R_for_receiver, R_for_receiver, R_for_receiver |
| 2 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | Amp_signal, Light_signal |
| 2 | LED | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | LED, LED |
| 2 | R_LED | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_for_LED, R_for_LED |
| 2 | R_PhotoR | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_for_PhotoR, R_for_PhotoR |
| 2 | R_emitter | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_for_emitter, R_for_emitter |
| 2 | R_for_emitter | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_for_emitter, R_for_emitter |
| 2 | photoresistor | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | Photoresistor 5, Photoresistor 6 |
| 1 | Amplifier | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J24 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Power & GND |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | GPIO Pins 1, 2, 3, 4, 5, 6 |
| 1 | Light Strip | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | OLED Display | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
The 32 most common of 36 parts.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!


Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.


It measures 81 × 51.5 mm and has 2 copper layers, 1.6 mm thick.
36 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the XiwenG1234/sensing_audio_visual_PCB repository on GitHub, at the commit this page was made from: the board is sensing_audio_visual_PCB.kicad_pcb and its schematic sensing_audio_visual_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask XiwenG1234 before reusing the design.