Skip to the content
2 layers38.6 × 38.1 mmEsp32-zune bluetoothaudio, the printed circuit board in 3D

Esp32-zune bluetoothaudio

xerootg/esp32_zune_bluetooth3

Add bluetooth audio to your Zune!

Size
38.6 × 38.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
63
Pads
161
Tracks, vias
393, 83
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
10 Jan 2023
Updated
31 Jan 2023

Overview

Esp32-zune bluetoothaudio is an open-source printed circuit board by xerootg, from the xerootg/esp32_zune_bluetooth repository on GitHub. It is a 2-layer board of 38.6 × 38.1 mm with 36 parts on 63 nets, routed with 393 tracks and 83 vias.

It is built around the ESP32-A1S, MMBT3904 and BAT54C. Its parts include 21 resistors, 4 capacitors, 4 transistors, 3 ICs and 3 connectors. It belongs with the ESP32 boards of this library.

Main components

3

Parts

36
QtyValueFootprintReferences
610kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6, R7, R8, R9, R10, R11
45.1kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR15, R16, R17, R18
4MMBT3904Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4
4optResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R20, R21
30Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R4, R5
33.3kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR12, R14, R19
210ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3, C4
21ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
1499Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR13
1AP1117-33Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1BAT54CPackage_TO_SOT_SMD:SOT-23D1
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ1
1ESP32-A1SESP32-A1S:ESP32-A1SU2
1TPMPackage_SO:Infineon_PG-DSO-8-27_3.9x4.9mm_EP2.65x3mmU1
1USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11J2
1Zune PassthroughConnector_PinHeader_2.00mm:PinHeader_2x06_P2.00mm_Vertical_SMDJ3

Similar boards

  • 2 layers79.9 × 41.4 mmGR ESP32-A1S, the printed circuit board in 3D

    GR ESP32-A1S

    GadgetReboot/ESP32-A1S

    Breakout PCB for the ESP32-A1S module including an audio amp and basic GPIO headers, USB interface

    65 parts27
  • 4 layers100 × 50 mmCross band handy walkie talkie V1, the printed circuit board in 3D

    Cross band handy walkie talkie V1

    immortal-sniper1/cross_band_handy_walkie_talkie

    cross band handy walkie talkie. This HT would include 2 SA818s, one for 70cm and one for 2m and could be used for satellite work.

    131 parts6MIT
  • 2 layers99.5 × 50.5 mm0089 Wardriver, the printed circuit board in 3D

    0089 Wardriver

    h4ck3rb0x/HackerBox0089

    Wispy Wardriving

    10 parts7
  • 2 layers137 × 63 mmKickad, the printed circuit board in 3D

    Kickad

    eljotx/SDR-TRX-on-ESP32-A1S

    This repository describes an SDR transceiver based on the ESP32 A1S processor, using an ILI9341 color touchscreen display, and a Si5351 oscillator.

    121 parts2
  • 4 layers104 × 158 mm281D, the printed circuit board in 3D

    281D

    DunningtonAudio/281D

    A quad function generator project

    380 parts24GPL-3.0
  • 4 layers38.1 × 101.6 mmESP32S2 Audio, the printed circuit board in 3D

    ESP32S2 Audio

    emeb/ESP32S2_Audio

    A Eurorack module demonstrating the use of the ESP32S2 as an audio effects processor

    124 parts8MIT
  • 4 layers104 × 255 mmRPi cape, the printed circuit board in 3D

    RPi cape

    GlobalVent/electronics

    Design files for PCB(s) and wiring

    535 parts1

Questions

How big is the Esp32-zune bluetoothaudio PCB?

It measures 38.6 × 38.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp32-zune bluetoothaudio use?

36 parts, built around the ESP32-A1S, MMBT3904 and BAT54C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp32-zune bluetoothaudio KiCad files?

From the xerootg/esp32_zune_bluetooth repository on GitHub, at the commit this page was made from: the board is esp32-zune-bluetoothaudio.kicad_pcb and its schematic esp32-zune-bluetoothaudio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp32-zune bluetoothaudio design in my own project?

Its repository states no licence, so its author keeps all rights: ask xerootg before reusing the design.