Skip to the content
2 layers95 × 45 mmFuzz face clone, the printed circuit board in 3D

Based on the original Fuzz Face overdrive pedal. I have made some modifications, mainly just using silicon transistors plus some values to suit the differences.

Size
95 × 45 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
11
Pads
36
Tracks, vias
67, 0
Pours
1
Routed
Yes
KiCad
KiCad 3
Created
21 Jun 2014
Updated
22 Jun 2014

Overview

Fuzz face clone is an open-source printed circuit board by xavpaice, from the xavpaice/fuzz-face-clone repository on GitHub. It is a 2-layer board of 95 × 45 mm with 17 parts on 11 nets, routed with 67 tracks and 0 vias.

Its parts include 6 resistors, 3 capacitors, 3 connectors and 2 transistors.

README

README.md

Fuzz Face Clone

Copyright (c) 2014 Xav Paice

Version 0.1 - initial prototype

Based on the original Fuzz Face overdrive pedal. I have made some modifications, mainly just using silicon transistors plus some values to suit the differences. Also this version runs on 12V for the PSU since that's what I mostly have on the bench.

This is an Open Hardware project. For details about OSHW, go to: http://freedomdefined.org/OSHW

All documentation and drawings are covered by Creative Commons Attribution 4.0 International License.

Creative Commons License
Hybrid Headphone Amp by Xav Paice is licensed under a Creative Commons Attribution 4.0 International License.
Based on a work at https://github.com/xavpaice/hybridheadphoneamp.

The schematic and PCB are all drawn with Kicad (http://www.kicad-pcb.org/).

TODO list:

Hacking:

  • Please do.
  • Please submit pull requests, I'd love some help

Parts

17
QtyValueFootprintReferences
3CONN_2Connect:SIL-2P1, P2, P3
22N3904Xav:TO92-EBCQ1, Q2
10.1uFDiscret:C2C2
110KResistors_ThroughHole:Resistor_Horizontal_RM10mmR2
115KResistors_ThroughHole:Resistor_Horizontal_RM10mmR5
11MResistors_ThroughHole:Resistor_Horizontal_RM10mmR1
12.2uFCapacitors_ThroughHole:Capacitor8x13RM3.8C1
122uFCapacitors_ThroughHole:Capacitor8x21RM3.8C3
15KResistors_ThroughHole:Resistor_Horizontal_RM10mmR6
1820Resistors_ThroughHole:Resistor_Horizontal_RM10mmR4
18K2Resistors_ThroughHole:Resistor_Horizontal_RM10mmR3
1A1MConnect:SIL-3RV3
1B100KConnect:SIL-3RV1
1Symbol_OSHW-Logo_SilkScreen_07Jul2012Symbols:Symbol_OSHW-Logo_SilkScreenSYM

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the Fuzz face clone PCB?

It measures 95 × 45 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Fuzz face clone use?

17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Fuzz face clone KiCad files?

From the xavpaice/fuzz-face-clone repository on GitHub, at the commit this page was made from: the board is fuzzfaceclone.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Fuzz face clone design in my own project?

Its repository states no licence, so its author keeps all rights: ask xavpaice before reusing the design.